Hello first of all,
I have a Xiaomi 1s e Scooter.
In the basement I still have an original Xiaomi battery from my old scooter (also Xiaomi 1s). Could this battery be installed as an additional battery in my new scooter?
(1 votes)
Loading...Hello everyone, I installed a new exhaust on my Peugeot SpeedFight 3 AC scooter (Doppler exhaust). I also tuned the exhaust in the clutch using a compression spring and clutch springs. Acceleration was good so far, so I tried tuning the scooter with weights. I tried the included weights (from the exhaust), but it didn't…
Hello, my float chamber is getting fuel normally. When I hold my hand against the air intake (where the air filter is normally located), I can feel the vacuum. Normally, I also get fuel on my hand afterward, but not this time, so no fuel is getting there. I've cleaned everything and pushed a wire…
Which device shows me the percentage of my lifepo4 battery? I know that you can measure the voltage using a multimeter, but I would like to see the exact % reading.
I have a TGB Bullet 50 2-stroke, 5 hp. I've already removed the spacer ring in the variator. Now it runs at around 64 km/h at 8.5,000 rpm on a straight road (51 km/h at 9.5,000 rpm with the spacer ring) and is otherwise much smoother and better. What would be the easiest way to…
My S51 B has always made a crackling noise starting at around 6000 rpm. To get rid of it, I changed my piston rings. Since then, the car sometimes responds more quickly to the accelerator, sometimes poorly, and sometimes idles quickly and sometimes not at all. The clattering is now much louder, and can be…
The second battery then needs its own charging control/discharge monitoring unit in parallel with the first battery.
In addition, the whole would have to fit from the place.