Wolfmix W1 MK2 wiring?

Hi, I wanted to ask you something, since I haven't found much on YouTube or the internet. If I get the Wolfmix, how do I connect it and how do I set it up on the controller? So far, I've always had two moving heads in automatic mode (without a controller).

Setup (below are the pictures)

• 4x Purelight Muvy Spotone (I already have 2) 12CHANNEL
• 4x Purelight PixelBar Switch, LED Bar, RGB color mixing 53CHANNEL
• 2x Purelight LED Wash Head, RGBW LED, DJ Lighting 14CHANNEL
• 4x AJD Mega TriPar Profile Plus – LED PAR spotlight 10 CHANNEL

If I give everyone an address Example: 4x Moving Head -> ADDr 001 -> ADDr 012 -> ADDr 024 -> ADDr 036 2x Purelight LED Wash Head ADDr 048 -> ADDr 062 4x Purelight PixelBar ADDr 115 -> ADDr 168 -> ADDr 221 -> ADDr 274 4x AJD ADDr 284 -> ADDr 294 -> ADDr 304 -> ADDr 314 (so I would also connect it with the DMX cable in the pure order)

QUESTION: Now I've given each device an address and connected them all with a DMX cable. Do I have to put the four different devices into groups A, B, C, and D for control, or do I always have to call up the address? Because I might add other devices/models in the coming years, for example, an RGB laser.

Another question: With the SoundLight , since the Wolfmix has a 3.5 jack at the back, does it automatically move the lights to the beat of the music or do you have to set something? I saw a YouTube video of how it does something with BPM but I didn't really understand it.

I would like it like that too https://youtu.be/e7kFzHLDoCM?si=G8HGHSGmwpygiD9m