22I replaced the lamp socket in the reading lamp of my halogen uplighter.
During assembly, I noticed that the green-yellow protective conductor, which was stripped at the end with a metal clip, was hanging freely in the housing.
Is that correct, or does it have to be attached somewhere since it is a metal lamp?
(Pictures attached)
Thank you very much in advance.
(1 votes)
Loading..."A voltage divider with a total resistance of rges = 500 ohms is connected to Uges = 10V. At idle, the tapped voltage is U2 = 4V. Calculate: 1) R2 at idle, 2) U2 at load with RL = 400 ohms, 3) Adjust R1 and R2 to give u2l = 4V."
Hello everyone, I have completed my training as an electronics technician for energy and building technology a few years ago and am considering setting up my own business or getting a job so that I can carry out device testing, among other things. Now the question is, can I take the exam as a journeyman…
I have a lamp with two cables per light but only one hole in the terminal block? Can both cables from one light fit into one hole in the terminal block?
Hey I just can't get any further with this task. 2. A blacksmith wants to cool a glowing piece of iron weighing 3.5 kg. To do so, he immerses it in 10.0 liters of water at a temperature of 20 °C. This causes the water to heat up by 30 °C. What was the temperature…
Hello friends, I'm about to freak out. I told my girlfriend her oven isn't working because the thermostat is broken. So now I've changed it and it still doesn't work. After that I thought it must be the circuit board (the part where you choose whether you want to grill, with heat, fan, etc.). it…
I want to build an electromagnet. The magnet needs a current of 180 mA. How do I find out which battery can output 180 mA? A battery has the voltage and ampere-hours, but as far as I know, you can't calculate the current from that. How do I do that? The current a battery can…
Direkt Ans Metallgehäuse.
Muss ich das irgendwie am Metallgehäuse befestigen? Und wenn, wie?
Ich würde einen ring oder gabel kabelschuh an den draht pressen und dann mit einer schraube am Gehäuse befestigen. Notfalls ein kleines loch bohren 3.5 mm loch und dann ne m3 Gewindeschraube mit mutter. Kabelschuh natürlich auch M3
<Erstes Bild ganz Oben ist Teilen noch eine Steckeraufnahme zu sehen. Dort miss der PE dran. Am besten mit einem Kabelschuh.
z.B. https://www.amazon.de/-/en/Heschen-Female-Terminals-Connectors-Insulated/dp/B07M6F2C1D/ref=pd_day0fbt_thbs_d_sccl_1/262-8773248-3113114?pd_rd_w=aVoVY&content-id=amzn1.sym.26fcca23-0cba-4d9b-ac73-10c54a86711c&pf_rd_p=26fcca23-0cba-4d9b-ac73-10c54a86711c&pf_rd_r=27TX6SQA7FWG0KH1N238&pd_rd_wg=Lwp8v&pd_rd_r=37f24e0f-3088-483a-826f-791e714fc218&pd_rd_i=B07M6F2C1D&psc=1
… noch besser als isolierte Variante.
Hallo
Der gelb/grüne Draht muss mit dem Metallgehäuse verbunden werden
Gruß HobbyTfz