ByHilfe528
I have a new PC and it won't boot because of this "Reboot and Select proper boot device" thing
The PC tells me that my system hard drive is not connected or disabled but my BIOS menu shows that it is active/connected
I'm really screwing up, this is already the second PC that has broken in a week
please need help, I'm too stupid for that
(2 votes)
Loading...In the car, I always listen to music via a USB stick. Normally, there are no problems, and all files play. However, some files that were definitely working before no longer play. I've already checked whether it might have something to do with the write protection, but that doesn't seem to be the case. Can…
Hello, As stated in the question, my M2 SSD is sometimes recognized and sometimes not. It is properly connected to the mainboard and screwed in place at the back. If it is not recognized, I shut down the PC and have to turn off the power supply, essentially taking the power off the PC. If…
Hi, I want to get my 3.5 inch LCD SPI touchscreen running with Kali on a Raspberry Pi 5. So far, it's just white. I can't download the full driver from LCD.wiki.com; my terminal says it's the wrong file for arm64. And even then, it's rubbish. My Wi-Fi is deactivating itself, so I can't turn…
Hi, I bought a new SSD (256 GB, Samsung 870 Evo) and connected it to the SATA port and power in my computer, but Windows 10 doesn't show this new second SSD. Only the one 128 GB Crucial. I need your knowledge about what I can/must do… PS: I haven't done anything on the PC…
I want to remove a hard drive. I've already made it to the hard drive itself, but there are no direct screws or recesses for removal. Should I try to force it out? There are also small recesses on the hard drive itself where I could perhaps use a screwdriver. Or would that just open…
So new is the computer no longer, the BIOS is from 2012. As in the second picture from below, you could try to select the Windows boot manager.
—————
Where is the Boot option #1 and Boat Option #2, was something changed in the BIOS?
Hard drive extensions to hang USB adapter and check .
If you cannot access it or if it is simply a defect, a new one will be due.
Take the CD out. It may then have to be entered in the bios that the hard drive is started.
Is this solid state drive my cd?????🥲😅
Yeah, I suppose. Take them out and then try to restart.
Where’s a CD?
I only see a 1TB hard drive.
Ok anyway thank you
Take the time to restart the CD. The settings in the BIOS are a bit complicated because you should ask a skilled person
And where can I start this now in the bios ding?
No, he doesn’t. He says you don’t have a boot medium.
That means you didn’t install Windows and either you didn’t install a Windows installation stick or you didn’t run wrong when creating a stick.
And how can I fix the problem
Because yesterday everything went normal
I also had windows and so
First you get a USB stick with at least 8 gigabyte storage space where either nothing is on it or where only things are on it that can be deleted.
With this stick you go to a computer that runs as error-free as possible and probably has no viruses on it.
Then go to the Microsoft website and search for the “Media Cration Tool”
You download this and install the Windows installation files.
When the stick is finished, you go to your turned-off computer. The Usb stick is then inserted and the PC is started. During the installation it is asked whether you want to use normal settings or use expert settings.
Expert settings are selected. Then everything is deleted that is called “Partitions” and Windows will be installed afterwards.
After Windows has been installed, you need to install the motherboard drivers by the motherboard manufacturer. Then the graphics card drivers from the graphics card manufacturer.
The PC works perfectly.
You just have to install an operating system.