Similar Posts

Reichen 2 x 30W bei 8 Ohm bei einem Verstärker?

ByHelmut3445

Ich möchte mir mit zwei kompakten Lautsprechern und einem Lautsprecher eine Alternative zu einer Soundbar schaffen, die beim Filme schauen und Musikhören zum Einsatz kommt. Dabei geht es mir um eine gute Klangqualität und nicht um hohe Lautstärken. Kann ich nun an dem Verstärker problemlos zwei B & W 607 S3 betreiben? Bei ihnen gibt…

Does anyone know of a cheap mid-range gaming monitor (8GB XFX Radeon RX 6600)?

ByLuckyKingPlayer

Yes, exactly, I'm looking for a gaming monitor that's as cheap as possible for little money. I have an 8GB XFX Radeon RX 6600 SWFT210 graphics card and am looking for something suitable for it. Does anyone have any recommendations or ideas in which direction or where I should look? VG

Subscribe
Notify of
5 Answers
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
PrincPersia
PrincPersia
4 months ago

That can have several reasons:

  • The HDMi/Displayport cable is loose or half defective
  • Something wrong with the graphics driver
  • Or your graphics card is half-broken.
  • Or maybe it’s even on the screen.

So first, I would see if the HDMi or display port is correctly connected to the screen and PC.

If it is properly connected, see if such distorted image can also be seen in screen menu setting if yes, then it is either on screen or on HDmi or display port cables themselves.

If the screen menu has quite normal image representation and it is not on cable, go to the BIOS and see if BIOS also has the same symptoms. If so, it looks like a defective graphics card.

Otherwise, try to update or reinstall the graphics drivers.

1
Schildkroete613
Schildkroete613
4 months ago

Check the settings and set a reasonable resolution. If this is not possible, install graphics driver. Best regards

0
NadjaX1970
NadjaX1970
4 months ago

Everything set right? Especially the settings for the graphics card? Reset the values for the graphics card to standard. If the error occurs again, the graphics card is defective.

0
Narrativium
Narrativium
4 months ago

See if the cable you use is properly plugged in and reset the image settings in the monitor menu.

0
data2309
data2309
4 months ago

Connection defect, wrong driver, bad cables, defective cables, etc.

the possible errors can be manifold

0