Similar Posts

Subscribe
Notify of
11 Answers
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Yamasuki10
5 years ago

What do you mean, when you turn or in the curve.

You have to keep the bike in a usable speed range, just shut down early enough.

You shouldn’t be less than 2000 rpm if possible, a 1000’s has enough space to pull through even below, a 125’s just needs more speed to stop dying.

Be careful when switching off from the 2nd to the first one can block the rear wheel if you don’t have enough gas.

Drive to a large parking lot and practice it as long as you make it right by yourself.

We all started and had to practice one or the other to control it.

I wish you all the time.

paule312
5 years ago

Why a motorcycle should strangle in the curve.

Otherwise as always pull clutch and turn n gear down…

heurekaforyou
5 years ago

Take the bike guide.

Then you will notice that it is hardly possible to choke his moped in a curve.

Gaskutscher
5 years ago
Reply to  heurekaforyou

It is very possible: simply try to take a serpentine with 300 rpm. 😀

Gaskutscher
5 years ago

Learn to drive properly.

If the motorcycle starts in the curve because you brake the engine -> you drive in the wrong gear into the curve.

fischtowndaddy
5 years ago

What?
Why should a motorcycle be strangled in curves?

Nexana00
5 years ago
Reply to  fischtowndaddy

Good question, never did it. Especially not in a curve.

Novalis011010
5 years ago

The question is more: how do you manage to wipe off your bike in the curve? 😉

ChristianKlaus
5 years ago

just go straight, of course

Nexana00
5 years ago
Reply to  ChristianKlaus

Great tip! Without a curve, he does not choke anymore.

ChristianKlaus
5 years ago
Reply to  Nexana00