Wie sollen da die hdd reinpassen?
Ich habe schon 2,5 Zoll hdd vertikal und hirizontal reingesteckten aber das passt einfach nicht. Das selbe my 3,5 zoll
Ich habe schon 2,5 Zoll hdd vertikal und hirizontal reingesteckten aber das passt einfach nicht. Das selbe my 3,5 zoll
Hi. ähm ich machs kurz und hab mit nem Partition Manager rumgepfuscht da ich nurnoch 472GB anstatt 475 hatte. Somit hab ich alle partitionen zusammengeführt und jetzt erkennt das laptop keine Festplatte mehr und zeigt: No bootable device an. Ist der Laptop jetzt kaputt oder brauche ich nur neue Festplatte?
Heyho. Ich brauche eure hilfe. Ich habe 1TB SATA gekauft. (Diese Karte) sehe aber das bei mir so aussieht. (siehe Bild) Meine Frage nun, was soll ich mit Sata 7,8,5,6 ? Auf der Festplatte steht Interface: SATA3 6Gb/s 2.5″SSD also SATA3 obwohl da nur SATA 7,8,5,6 da ist. Oder kann ich ganz normal anschließen? LG
https://www.amazon.de/Seagate-STEA1000400-Expansion-Portable-Festplatte/dp/B00TKFEEAS/ref=sr_1_10?crid=3GO88JBVUWUZU&keywords=ps4%2Bexterne%2Bfestplatte%2B1tb&qid=1656322266&sprefix=PS4%2BExterne%2Caps%2C73&sr=8-10&th=1
Ich habe eine externe Speicherplatte von Hurricane, welche mir immer problemlos am Laptop angezeigt wurde. Jetzt jedoch zeigt es das Laufwerk G, auf dem die Speicherplatte war, nicht mehr an. Im Geräte-Manager steht, dass die Speicherplatte einwandfrei funktioniert, aber wie kann ich sie dann öffnen?
Aktuell bin ich auf der Suche nach einem Freeware! Programm, mit dem ich meine HDD sicher löschen kann. Die meisten Programme bieten in der Trial nur unzureichende Methoden an DBAN bootet zb von meinem USB-Stick nicht
Meine externe Festplatte ist mal wieder am Arsch. Ich vermute, dass es wieder am USB-Kabel liegt. Weil die Festplatte lässt sich nicht anzeigen und gestern ist sie mit von meinem PC auf den Schreibtisch gefallen. Meine Festplatte ist von Toshiba mit einer Hülle von Sabrent. – Der Treiber ist aktuell, manuell musste ich bis jetzt…
Hi, if it’s an old, used case, I’d say what’s missing. In the case of a new housing, operating line, try and see what parts are left.
You can’t really see what this is.
When it’s back, the nen Slot fuers power supply could be, if it’s in front, that could be the nen Gehaeuse/ne Box fuer CD/DVD drives.
Or also a push-in for a further holder/box, so there is also more.
It’s down front and it’s got a grid in front.
A 3 1/2 inch drive would have to fit into the yellow marked location.
Upstairs are two holes, which should be for the screw fastening.
Take a look.
No, the 3.5 inch hard drive doesn’t fit in either.
How high is the shaft?
At the bottom it looks like there’s a “ground plate”. – Isn’t she getting away?
Bit smaller than the 3.5 inch hard drive. To be exact 9.5~9,8cm
Wrong case concerned…
If there’s no hd in there, why is it there? Or what is it?
Maybe there’s another push for the cage.
The cage does not look like a conventional plate holder, since the usual fastening mechanisms are missing. Maybe set a brighter picture?