Wie problematisch ist es, dass Automatikuhren +- 40 Sekunden pro Tag abweichen?
(1 votes)
Loading...
(1 votes)Loading...
(1 votes)Loading...Similar Posts
Average distance of the sun from the planet Neptune?
ByDanya175
Hello! Can someone please help me? It would be best if it were written in scientific notation . Best regards
Is indirect UV radiation harmful?
Hello, I wanted to get a UV curing lamp to cure my resin prints faster. To prevent the UV light from shining everywhere, I would place it and the print in a closed cardboard chamber and wear UV protective goggles when taking it out. Now I've heard that some of these rays are supposed to…
Physics task performance?
A vehicle with a mass of 1200 kg overcomes an elevation difference of 800 m. How long does this take if the power is 20 kW? I tried it and came up with a calculation.
Can you help me?
A car starts from rest with a constant acceleration of 2 m/s². First, derive suitable formulas. Calculate, without GTR, after what time the motorcycle has reached a speed of 140 km/h? please please help mor
Ideales Gas?
ByJadmajd
In einem geschlossenen Behälter mit einem Volumen von 18 Liter befinden sich 32 Gramm eines idealen Gases. Wenn das Gas auf 55°C erhitzt wird, steigt der Druch auf 2,7 bar. Frage : Berechen Sie die molare Masse des Gases sowohl mit Hilfe der idealen Gasgleichung, als auch über die mittlere Molekülgeschwindigkeit? Ich habe so gerechnet:…
Would you return this solar panel?
Hi, I received a solar panel that looks like it's damaged. Could this be due to production tolerances? be?
As you wrote in a comment, this is a Miyota Caliber 82S7 standard.
This is a very simple movement that unfortunately cannot be regulated.
Unfortunately, things tend to magnetize quickly. You could try it at most with a small demagnetization rate (via Amazon for 15 Euro) or with a watchmaker.
I don’t give you a guarantee. It may also have another cause. Forty seconds, I’d definitely be too much.
Thank you!
I’m lucky I haven’t bought the watch yet. I’m a watchman but not an expert. Low price watches up to 1,000 EUR are often ugly or inferiorly processed. And about it is often anger.
Do you think I can find the good quality on my travel abroad, such as Spain or Italy, so that I can get something other than Mido, Timex and the other well-known brands?
No, I’d rather trust the old traditional brand.
In the price range also a Mido (will be more difficult for the price). But also Hamilton, Tissot, Certina or Seiko.
I don’t know any Spanish manufacturers at all.
From Italy, I only remember De Tomaso (in the meantime insolvent). Apart from pantry, of course, but find these legendary watches You’re in the luxury class.
This Miyota also has a backer of rest like 99% of all other mechanical watches and can of course be regulated in all positions.
https://miyotamovement.com/product/82S7/
Ah yes – clearly recognizable on the fourth picture.
I was wrong. Thank you.
Starglass is also mainly built by Miyota’s watch works. From design rather the Bauhaus style. I have no experiences with these watches.
If you like these watches, you buy them.
Gives works with restlessness without backers, of which you better leave your fingers as a layman or hobby craftsman, but they are usually out of the financial range of most people. I’ve never been able to see live.
https://www.uhrenkosmos.com
Thanks for the tip! 🙂 I also have a recommendation for you. I find these watches here very nice of star glass from Hamburg. I don’t know how high-quality the clockworks are, but the watches are beautiful in any case!
https://www.sternglas.de/
No. They’re all world famous.
Here in Germany, I could call at most a regionally known brand Steinhart, which produces super-processed watches (with Swiss movement). I own a rock chart myself.
https://www.steinhartwatches.de/en/
But I am also a fan of SEIKO or their 100% daughter ORIENT at cheaper watches. You get them at Amazon.
Are very good watch manufacturers automatically world famous or are there also small unknowns that are only regionally known?
Whether this is problematic, you have to decide yourself, a great value is not that, even not for a favorable automatic. Apart from that, 450 – forn Ticker with Miyota work are clearly too much. Half would be enough, more likely even a quarter. Look better at the China Böllern. Pagani, for example, installed simple Seiko works. For 450,- you also get a neat Steinhart with Eta Klon and come in areas of under 10s.
Open rest is a detection feature for scrap.
This is also relatively much for an automatic clock.
In general, it is not so bad that automatic clocks can differ somewhat. That’s what you wear more because you find it cool and less for practical reasons. You have the right time on your phone, PC and so on and can adjust the clock.
If you want a lot of information to bring a smartwatch more, Quartz is cheaper and more accurate.
That’s a lot.
What time is that? In a few days there is a lot of humming.
The French automatic watch Initial by Charlie Paris with a proud price of 445 EUR:
Automatic Men’s Watch – Blue Initial Open Heart Charlie Paris (charlie-paris.com)
thanks for the link, is very interesting that such an expensive clock deviates so much. I had my Citizen about 30 years, and she went in seconds. Always. After that she stopped and since then I can’t decide to throw her away. It is no longer beautiful;-)
I don’t understand much about watches. But how much one moves should not make a difference. The movement moves such a thing that I can see through the transparent housing. It has a name I don’t know. It could be “Anker” or “Unrest”. She swings back and forth and pulls the clock. My watch doesn’t stand because I’m a snail, but because I’m leaving it at work and forgetting it to be pulled up. After 5 times shaking or three times at the “Rad” (also has a name) turn it then again. (Yes, the price of the watch was quite high, that’s it. Some times you want something absolutely).
Please 🙂
It may be natural that these are the absolute maximum values for “snails” that almost do not move. 😉
A normal person usually moves a lot a day and that should certainly also lead to much smaller deviations at this watch, I think.
Personally, that would be too much for such a quality watch.
My china automation fluctuates between 0 and +40 sec/day, but has also cost just under 30€.
In a Miyota I would tolerate up to a maximum of +20 sec/day. Can be easily adjusted.
Depends on how exactly you need to know the time. And how often you correct time.
Well, it’s not problematic. But that’s a lot, because it’s humming and that’s almost 5 minutes a week.
High-quality watches can adjust the watchmaker.
And not “high quality” watches of a maximum of 500 EUR ?
You can regulate almost any mechanical clock, your Miyota quite simply. My mechanical watches have all regulated themselves, all have under +15 sec/day
You have to look at how far you can regulate them.
Look here, it’s being explained.
https://www.uhren-mikl.com/werkstattberichte/regulation and control of mechanical watches/
You can adjust a mechanical watch so that it runs more closely.
Every day correcting goes of course also
I’m a watchman but not an expert. I just need to put the clock back regularly when I notice it is not going exactly. Or what do you mean by regulating?