Similar Posts

Subscribe
Notify of
3 Answers
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Benutzer102023
9 months ago

Hi.

try the hard drive on another PC, not that the, or the cable is defective. Wwn it is a 2.5″ that gets the power via USB, it is important only to take the short cable from the Herstrller.

If this works, but not on your PC, throw down the USB drivers.

guenterhalt
9 months ago

Perhaps the external does not get enough power.

A USB 2 port can only deliver 500mA.

Your PC already recognizes the plate and tries to integrate it. This program then blocks everything else because it does not end itself.

1. Use a USB 3 port (you can find 1000mA).

Two. External power supply if possible.

3. Try another PC.

With a trick you can also bring voltage directly from the PC to the plate. But that later.

herja
9 months ago

Unfortunately, there are many possibilities.

You can try some ways: https://www.easeus.de/storage media recovery/external hard disk-reacted-not.html