Hello,
I want to weld a kart and wanted to know if a cheap welder (I'd prefer flux-cored wire) would be sufficient to prevent any breakage. I've never welded before, so I'm not very familiar with the process. Could you recommend one?
Lg
(1 votes)
Loading...Mig/Mag welding with Co2 works, yes, but is that specifically useful? Thanks in advance.
Hello, I need help because the roof on the rear window of my Audi S5 Cabriolet (F5) keeps tearing. According to the car upholsterer, the cause lies in the convertible top mechanism. The Audi workshop cannot find any fault and says it is normal wear and tear Does anyone have a similar experience or how…
Who is responsible for the compensation? It seems to have been a problem with the EGR valve; BMW had just been to the BMW workshop for a quality inspection!
Hello, I have a Golf 4 1.6 16v which is losing oil somewhere on the side of the timing belt. I assumed the timing belt cover was leaking. Timing belt and rollers are oily but it is not clear where it is coming from. simmering is dry
Hello, the onboard computer of my car (Opel Omega B, facelift) says to check the oil level, but no warning light is lit. How do I do this? In driving school we only drove Teslas.
Hello, I want to buy a car on eBay. It seems to have new springs and a lowering system. I have a parts credit. It just needs to be registered. How much money and risk should I expect? I mean, there's a credit… VG
Have never had good experiences with cheap welding equipment. It can be very dangerous, think about it.
What can you recommend?
Is that okay? Other
First of all, you should be aware of yourself, WAS You want to make exactly what materials you want with which wall thicknesses under which expected load moments at which points your body wants to assemble.
Otherwise, you can always be treated with whatever hovering procedure, if you have no idea of body construction at all.
In this sense, if your craft should not unpredictably break you apart in the most unfavorable situation breaking around your ears!
I would use rectangular hollow steel and put more on high loads to better distribute the pressure. The question is now whether there is a cheap welding device sufficient to hold it together well.
Even from the poorest living conditions, trained people can use the electrode or autogenate a lot.
DIESE people, however, also resort to decades of self-experience.
Not for the best practiced welding process in itself, but to the extent that they are welded together.