Which light bulb for this socket?
What kind of bulb goes in there? I can't get anywhere with a screw thread.
(1 votes)
Loading...
(1 votes)Loading...
(1 votes)Loading...Similar Posts
Hello, I bought a new DJI Mini 3 Pro and want to charge it for the first time but it doesn't work. The last 2 LEDs on the battery indicator flash 3 times at the back.
The last 2 LEDs on the battery indicator flash 3 times in a row. Why?
LED strip?
If I cut my LED strip, how do both halves work?
Calculator shows strange result?
Why does my calculator show 500m? How do I change this?
Why won't my Sony TV start anymore?
ByLxis67
Hello, I wanted to ask why my Sony MODEL NO. KD – 65XD8505 only boots up and then charges the entire time?
Fan cable in contact with case?
ByIvo96
If there was electrical contact between the positive pole of a 12V PC fan cable and the computer case, would the residual current device in the meter cabinet blow?
There’s nothing coming in, there’s something inside. The small yellow point in the middle is the bulb – an LED. So there’s at most a transparent cover on it.
If the LED is defective, it can obviously only be replaced by soldering. Most LED lights are not intended to be able to exchange the lights. Disposal society and so, you know.
There were some big pears in there before, as we did when we were dismantling.
They were just covers. As already said, the bulb is still present.
In the electrical installation of a building, only electrical specialists may work and persons who have been sufficiently unrespected and are controlled after work has been completed. Since I assume that you are not one or the other category, you cannot replace the lamp yourself. Whether you do it yourself is your thing. It is basically not difficult, but if you make a mistake, there may be a risk of life.
As far as I know, this lamp has been of Ikea. If I just buy this lamp again, I can simply connect it or it must be done by the expert.
Probably not. I’m sure it’ll be some kind of custom. Lampshades and covers are not standardized, as every manufacturer can finish what he wants.
Where can you buy such covers?
If I read the comments and all that, I could imagine that the “believes” you have agreed were nothing more than covers for the LEDs to distribute the light. What you think is an LED.
Lg, Anna
And just make a cover on it doesn’t work? Why can you make it so easy, but don’t you get back on it?
I guess there’s something going on. It was probably not intended to remove this cover.
Hm, as previous speaker said, difficult.
But then the cover could not open.
Possibly replacement for a plug socket.
Try to pull carefully
This is not a space for a light bulb but a fixedly installed LED.
It can’t change
There were three out of four in there before. We’ve done them out somehow. And now does a skilled person have to reinstall it?
Hello SchlunzSchmidt
The yellow in the middle is an LED.
The thread may be for a protective glass
Greetings HobbyTfz