Ich glaube, bin mir aber nicht sicher, der Abstand ist bei jeden LED Streifen (Marken) gleich.
(No Ratings Yet)
Loading...Tag, mein Samsung Fernseher funktionierte noch vor wenigen Stunden. Als ich dann gerade nach Hause kam, funktioniert er garnicht mehr. Der Fernseher bekommt keinen Strom. Es liegt jedoch nicht an der Steckdose. Wisst ihr eventuell woran das liegt?
1)In the following circuit, the current should be calculated using two-terminal theory? 2)And determination of the total resistance and the power consumption of the consumer group RL-R1. Uq1= 110V, Uq2= 100V Ri1 1Ohm, Ri2=0.5Ohm RL = R1=20Ohm Abbreviation: ers. = replacement My idea is: 1) PZP: Rl and R1 AZP: Uq1, Ri1, Uq2 and Ri2…
Servus habe hier meinen kaputten röhren Radio wollte jetzt im Inneren etwas dran basteln der Radio ist schon seit einem Monat ungefähr ausgesteckt und stand jetzt auch einen Tag in der Garage sind die gefährlichen Spannungen immer noch im Inneren oder kann man mittlerweile reinfassen und es passiert nichts mfg
Hey guys, I share a TikTok account with a few other people. We upload content there together. Here's what happened: Someone in our group deactivated the account, and it was close to self-deleting. However, we were able to prevent that by reactivating it. Since the reactivation, however, we've been receiving spam calls and text messages…
Can I use the cable that came with the S24 with my 65-watt adapter, or do I need to buy a new one?
Man spricht doch immer davon das zb ein Dynamo am Fahrrad Strom erzeugt aber das ist doch eigentlich falsch oder? Was erzeugt wird ist doch eine gewissen Spannung und mit dieser Spannung wird der Strom in den Kabeln zur Bewegung angeregt.
This makes every manufacturer as he wants or makes sense with his product.
There are always several LEDs connected in series because an LED needs about 3V. The higher the operating voltage of the strip, the more LEDs are connected one after the other and thus “inseparable” which then increases the length of the segment. A 12V stripe almost always has significantly shorter segments like a 24V stripe.
And cheap STreifen often have fewer LEDs per meter, so the segments are longer than the “bright” strips where more LEDs per meter are on it.
You can only set the distance on the packaging or in the data sheet of the respective strip.
I only know that I already had different LED strips in my hands, with different distances of the separable copper contacts.
This was often due to the fact that the individual LEDs already had different distances.
On the website…
https://shop.led-studie.de/led-trip-module/led-trip-color/rgbw-fuer-akzentlicht-4in1-leds-72-leds-m-12v-ip20-5mrolle/lk04-6e
… I found a different picture next to this picture, on which lengths are also noted.
The centers of adjacent copper contacts are therefore approximately 0.25 cm apart.
The distance between adjacent copper contacts [so from where one stops until where the next begins] is about 0.08 cm to 0.09 cm.
The distance between the individual pads is probably 2.54 mm to 5.08 mm.
Are you talking about the distance between the separable segments and the possible length or the lateral distance of the individual channels?