I need to mount a piece of fitness equipment to the wall, and this "dowel" came with it. Can you tell me the correct name for it and how I can properly mount it to the wall?
There was this small ring between the washer and the nut. What is its function and is it in the right place between the nut and the washer?
Thanks in advance 😊
(1 votes)
Loading...I have a ceiling that I want to insulate as well as possible. For this, I would use 140mm mineral wool. The problem is that the wooden beams, with their comparatively good thermal conductivity, create a cold bridge. There are roof tiles above the beams without insulation. This means that the outside temperature is transmitted…
I have a 6mm Allen screw on my bike and the screw is tightened with 50nm. I did that but when I loosened it again it slipped and now the Allen doesn't grip anymore. What should I do now?
I'm currently really into crocheting bralettes (bra-like tops). Until now, they've mostly been made of acrylic yarn, simply because that's what I had around. I haven't crocheted one for myself yet, and the people I've crocheted them for don't seem to mind that you probably sweat a lot underneath. Now my acrylic yarn is crocheted…
A lot of dust always accumulates very quickly in my house, which I can't understand. I'm generally much tidier and cleaner than most adults. Can anyone give me some tips or something similar? Thanks
Our tiles have joints of varying sizes, sharp corners where rails meet, and bumps everywhere. Is this normal or a botched job? The last two photos are kitchen
Hello, I wanted to ask whether BLUEMEX Diamond Painting GmbH is just an online shop or whether you can also buy something there on site.
It’s a heavy load anchor. Please use only for compact walls, or ceilings, without cavities that are made of stable material. So concrete, solid brickwork. No poroton, ytong, clay masonry. Bims and light concrete only if it is really solid and stable. You can throw the snap ring away. The method has never seen anything in screw locks.
Hello
The dowel belongs to a matching hole (he must be stuck inside), then you can screw the nut as tight as you can.
The ring is a snap ring and belongs between the cover plate and mother, it prevents the mother from self-dissolving
Greetings HobbyTfz
After a second look, it is probably a spring ring. However, it has been known for a long time that these are ineffective as a loose-rotation protection for screws of higher strength. However, for this type of fastening, no bolt securing is necessary. In any case, I would leave the ring away and, if a fuse is desired, instead use a nut with a clamping part.
Whether you can use this dowel isn’t even fixed. It comes on the wall, what is it.
Hello,
Dowels of this type are usually sold as heavy-duty anchors, bolt anchors etc. It seems to be more likely to be a “more favourable” model. If there are no assembly characteristics as well as instructions for installation, I would not use it. By the way, such dowels are usually only permitted for concrete.
I don’t know what the ring has. I don’t know him from other dowels.
spreader plug for concrete. The ring comes between u pane and mother. I do not see size now but in description should stand which diameter is drilled. But it’s concrete
The hole as thick as the dowel then drill the device over the hole and then blow it inside and put FESTE on