Hi,
I recently found a Vivanco MX 790 EC mixer in the attic. I was thinking about maybe controlling my PC sounds (headset, speakers, etc.), i.e., adjusting the volume with a slider. Where do I plug things in? I have no idea about that.😞
LG
Thank you in advance
(1 votes)
Loading...Hi, I have a question: can you connect this Sony SS-TS92 to a PC or MacBook?
Since switching to Windows 11 I've only had problems. My in-game sounds are just ugly. All the other sounds are normal except for the video game sounds. I don't understand it at all. How can it be that when I record something like Valorant, the sound in the video is normal, but when I play…
At the moment it is in the living room and it sounds good there but I wonder if I put it in my small room if the sound will still be OK or if it will sound so muffled
Good Morning, With every pair of headphones I've used so far, one side suddenly becomes much quieter than the other after a few days. These are in-ear headphones, and I always keep my headphones very clean and regularly clean them of any earwax (after removing them). I've already checked various settings to see if the…
https://www.smallanzeigen.de/s-anzeige/vivanco-mischpult-mx-790-ec/2762113507-172-4899
That should be this DJ Mixer
On the back are usually Cinch connectors for the signal. This could be connected from Aux In to a main out of the mixer to the Hifi amplifier.
Otherwise we usually take active boxes. From the outputs at the mixer to the input to studio monitors or PA boxes
The channels will be either jack for microphone or XLR.
switchable Phono channels for turntable or CD line inputs via Cinch
To use your Vivanco MX 790 EC mixer to control the volume of your PC sound, you need to know which connections you should use. Here are the steps to set up the mixing console:
### 1. ** Overview of the mixing console**
The Vivanco MX 790 EC is an analog mixer with different audio inputs and outputs. Usually you find the following connections:
– ** Microphone inputs (Mic In)**: For microphones.
– **Line Inputs**: For devices such as PCs, smartphones, etc.
– **Outputs (Main Out, Monitor Out, etc.)**: For speakers, amplifiers, etc.
### 2. ** Identify connections**
– **PC sound output**: Usually a 3.5 mm jack (often marked as “Line Out” or “Headphone Out”).
– **Mischpult input**: 6.3 mm jack or RCA connectors (depending on model).
### 3.
Get the right cables:
– A **3.5 mm clink to 2x 6.3 mm clink cable** or **3.5 mm clink to 2x RCA cable**.
### 4.
1. **Close to mixing console**
– Connect the 3.5 mm jack plug to the audio output of your PC.
– Connect the other ends (2x 6.3 mm pawl or 2x RCA) with the corresponding “Line In” inputs on the mixing console.
Two. **Connect to speaker/headset**
– Connect the Main Out connectors of the mixer with your speakers or amplifier.
– If you want to use a headset, you can use a headphone amplifier that is connected to the “Monitor Out” or “Headphones” output of the mixer.
### 5. **Settings on the mixing console**
1. Make sure that the levels (fader) of the channels you use are zero (at the bottom) before you turn on the mixer.
Two. Turn on the mixer and slowly increase the level of the channels you use.
3. Check the master and monitor fiber and adjust it accordingly.
### 6.
1. Play an audio source on your PC.
Two. Use the fader of the mixer to control the volume.
3. Make sure you don’t cause feedback or overcontrol.
### Summary
With these steps, you should be able to use your Vivanco MX 790 EC mixer to control the volume of your PC sound. If you still have specific questions or problems, I like to be available.