Hello everyone, I am studying electrical engineering in my 4th semester and would like to slowly expand my knowledge of programming and practical work through my own projects. However, I'm not sure where or how best to begin. Do any of you know of any books or apps that allow you to visualize your project…
As cheap as possible… without it burning down 😅
I wanted to buy a 10,000 mAh power bank and was wondering if I could attach a solar panel to it. Is that possible?
Hello to all hobbyists, I've decided to build a Gameboy emulator with my Raspberry Pi Pico and am using this article as a guide: https://www.youmaketech.com/pico-gb-gameboy-emulator-handheld-for-raspberry-pi-pico/ . I've already ordered all the parts I still need. However, I just now realized that this emulator can only play "normal" gray .gb Game Boy files. That's stupid because…
I'm looking for a good, yet affordable filament manufacturer that offers a wide selection of colors. It's especially important to me that the spools are properly wound, as one I bought was pretty poorly wound… As material I would only need PLA and PETG, possibly ASA but that will only be relevant later Which manufacturer…
Looking for quiet fans for once 60x60x15mm, 24V, 0.10A 70x70x15mm 24v, 0.08A 40x40x10mm, 24V, 0.03A 45MM 24v, 0.08A Blower fan These would be for my Anycubic Kobra Neo 3D printer, as the current ones are very loud
The fan on my 3D printer is quite loud. So I'm looking for a quiet alternative that fits my Kobra neo. Which one would be suitable?
I was recently thinking about buying a 50cc moped and tinkering with it. Maybe adding new parts, personalizing it, wrapping it, and things like that. Just getting to grips with these engines, the technology, etc. To what extent is this legally possible (do you have to register parts, etc.) and how much does it cost?…
https://www.ebay-kleinanzeigen.de/s-anzeige/husqvarna-sm-125/1881920531-305-8902 I asked the seller and he said a Husqvarna SM 125 H2. However, it only has 11 hp. I don't have the best experience with Husqvarna models, but I know it's a 2-stroke, and they typically have 20-35 hp when open and 15 hp when throttled down. But the paperwork says 8 kW/11 hp….
Dear tinkerers! For a school project tomorrow, I'm building a vacuum chamber. To make it as pressure-tight as possible, I thought about using a large jam jar. To build up the pressure later, I just converted an air pump into a vacuum pump. The valve for the chamber is an old bicycle valve, which I…