Hey, I recently got a Bambu lab A1 mini. According to Bambu, it has a print area of 18x18x18cm. I wanted to print something 18cm x 18cm x 4mm in size. But Bambu Studio says it won't fit on the print bed. I set the size to 17.9cm, and now it works. The one mm…
I have a Flashforge Adventurer 5M and want to print a case for the printer out of PETG. I'm using an Orca slicer. I've calibrated the filament and use a flow rate of 0.98 and an advanced pressure of 0.05. I heat the print bed to 70 degrees Celsius and the hotend nozzle to 240…
Hey everyone, I bought a new laptop. It has an i5 Gen 12 and an RTX 3050 16GB DDR4 (I've already ordered a 32GB stick). Games like the new Forza, Far Cry 6, and Rocket League run really well on the laptop. But applications like 3D Builder or Cura are very choppy, and slicing takes…
Hello, I'm a bit new to the 3D printing scene. So, I always use Cura UltiMaker to slice my 3D prints. When I finished slicing, these red areas appeared (in the preview). Does anyone know if this object is printable? Thanks in advance! I'm using the Elegoo Neptune 4 Plus. No supports are selected.
I'm new to the 3D printing world and wanted to ask if anyone has any experience with which slicer is suitable for the Kobra 2 neo or which one already has a profile for the Kobra 2 neo.
I have two file types, .fpp and .gx, for a 3D file. However, I would like to convert the whole thing into a more common file like .stl or 3mf for another 3D printer. It would also be sufficient if I converted the Gcode from the .gx file into another Gcode file. Does anyone have…
Hello everyone, I have an Anycubic Vyper and print with PLA. Unfortunately, I often have the problem of thin threads, so-called stringing, forming between the parts during printing. I've experimented with different temperatures and retraction settings in Cura, but the problem still hasn't been completely resolved. Now I'm wondering if switching to a different slicer…
I want to scale this file in my slicer and then save it as GCode for printing. But every time I click on Slice it's like a part is deleted and the floor is inverted. I've tried other slicers and have the same issue. It's only with this one. Everything else works without issues.
My 3D printer occasionally exhibits a loud shaking noise on the X-axis. Unfortunately, I haven't been able to identify a clear cause for this sporadic shaking. However, the problem doesn't always occur, and after a short time, the printer usually returns to normal and prints flawlessly. I have an Anycubic Mega X that's almost 3…
I want to create my own objects for my 3D printer, but I don't have a program for it. Can you recommend a free program?
I found this on the internet, but I'm not sure what it is. It looks pretty interesting, but I couldn't find anything concrete about it online.
Hi I have a question regarding 3D printing. Is it possible to send gcode from the slicer directly to an anycubic kobra 2