Good evening everyone, I unfortunately have to build an adapter for some conversion work. I need the counterpart for the following plug. I've searched everywhere but haven't found anything useful. Does anyone have any idea what the plug is called or where I can get the counterpart? I'm grateful for any information. Here is the…
Good morning, My 13.5 hp Briggs and Stratton lawn tractor engine has two wires (black and red) coming from the flywheel. What is the function of these two wires (see image), and are they necessary to run the engine?
Hello, I would like to know what this type of connector is called and what it is intended for. Thank you.
Hey guys! I have a question for you! I want to use the Deutsch DT connectors for the connections on a small CNC. They don't need to be dust or waterproof. Are there any connectors with a similar connection mechanism?
Hey guys! I have a question for you! I would like to use the Deutsch DT connectors for the connections of a small CNC, but have never held them in my hands. Is it easy to connect and disconnect the connectors (after assembly)? I imagine it's not always that easy because of the orange seals….
I need a connector that interrupts the "old" circuit and reconnects it to the cable on the plug. If possible, it should also be splash-proof. 😀 The PDC on my Tesla Model 3 with a retrofitted tow bar keeps sounding the alarm. The idea is to install PDC sensors on the trailer, connect them to…
An extraction system must be separable at a flange. The power supply must also be separable at this flange. In other words, if the upper part (the motor housing) with the flange is separated from the filter housing, the plug must also be separated. Conversely, the plug must also fit well into the socket when…
Hello, I wanted to know how to choose the right connector for my circuit board's power supply. I'm aware that the operating voltage is the voltage at which an electronic device actually operates, and the nominal voltage, as specified by the manufacturer, is the value of the electrical voltage during normal operation. In my case,…
Is there a way to extend the plug connection as shown in the photo and ideally provide it with a switch that interrupts and resumes the supply when activated?