Hi, I have a small project where I control 2 LED strips separately with 2 ESP32 C3. I transmit the control line for each strip using a CAT-7 cable approximately 10 m long. I use a level converter for amplification. If I route the control lines over 2 individual cables, everything works perfectly. However, to…
Hello, I'm planning on buying a lightsaber. I have a budget of around €300 and would like to just put it on my shelf to look at. I found one I like on the Nsabers website. Is this site any good, or has anyone had experience with it? Here's the link for anyone interested: https://nsabers.de/products/katana-licht…
Hello, I have the following problem. I have five 5m LED strips (SK6812 RGBW) and control them with five ESP8266 mini boards. I soldered the ESPs to a separate board and soldered the positive and negative leads together. A button controls the ESPs. My problem is that when I control the LED strips, the LEDs…
Hello, I need a roughly 30m Neopixel strip for a project. Can anyone tell me up to what length the data transfer will run smoothly? 1m = 60 pixels
Hello, I'm currently building a lightsaber with LED strips and I need a polycarbonate tube with a 3cm diameter as the blade, but I can't find anything anywhere. Does anyone have an idea how to get one? I'm happy about any help 😀