I have no desire or money to spend over €100 on a reinforced crankshaft. Can you ride the Ori wave for now? The same goes for the carburettor, if I just put a bigger main jet in instead of the 17.5 carburettor
The problem is this… I've been driving a '77 Street Race with the original crankshaft and bearings for half a year now. The engine has about 20,000 km on it. I've noticed that the flywheel on the ignition side has a slight amount of play. It's invisible to the naked eye, but it's noticeable as…
Hello, I took my engine apart and then lost the number 18 in the picture and unfortunately I don't know what dimensions it has. Can someone please help me?
Hello, I suspect that my 1989 Suzuki TS 50 XK might have a crankshaft failure. I can't find a replacement right away; I can only find used ones or non-authentic ones. If I replace everything, I don't want to have another failure after just a few rides. Now my question is, can I install a…
Hello everyone. I have a 1999 Aprilia RS 125 MP. I was planning on installing a new cylinder as a winter project. The Polini 154cc cylinder kit caught my eye. However, I'm struggling with the idea of leaving the original crankshaft and bearings in place. Would that be possible, or do I have to replace…
Since my bottom bracket is damaged, I wanted to replace it with an identical one. However, I can't find the exact model number "BC73ME" from this manufacturer (VP components) anywhere online. I only see the model without the "ME" suffix. What does this mean, and is the other version also suitable for me? Thank you…
Hi, I asked a question but maybe someone can help me. I've had a Golf Mk6 1.4 TSI since August 2023, and I've been driving it for 10,000 kilometers, and everything's been fine. Recently, the spark plug went bad. I replaced all four plugs, and I did the ignition coils separately, as I ordered the…
Hello, I have a Simson Habicht whose engine is still in completely original condition. A friend once told me that he vaguely remembered that the models in the Vogel series had a not so good crankshaft, which many of them replaced with the new version during restoration, such as the S51. During my research, the…
Hi, I have a problem. When I wanted to put on my pulley, I noticed that the thing is not turning. What should I do and how much would it cost in a workshop?
Good day, I replaced my crankshaft pulley yesterday because it had fallen out (apparently, this is a common problem with my car with 300,000 km or more). Now the problem is that the pulley on the crankshaft is wobbling around. Could this be because I didn't place the V-belt correctly on the two rollers that…
Hi, I have a CPI GTR 50 built in 2004. Speedometer says 6000 km mileage (2-stroke, Euro 2, Minarelli lying/horizontal) The scooter has probably been sitting for several years. It currently has a license plate from 2009. I wouldn't be surprised if it's only been driven sporadically since then, let alone started. Overnight, out of…
As stated above, I would like to know which puller you need for the Dachs 505 engine because my father said that you need pullers, I knew that for the flywheel, for example, you need one, but which one would I need and for where? Thanks in advance