Sovol SV08 Upgrades!?
I'm buying the SV08 soon and I'd like to ask, since I'd like to upgrade it a bit, what could or maybe even should be upgraded?
(1 votes)
Loading...
(1 votes)Loading...
(1 votes)Loading...Similar Posts
Watch a 3D movie with glasses?
Hello my question is I have recently got glasses and we are going with the class to the Avatar film 3d how does that work then do I have to take off the glasses and put on the 3d glasses or how
Anycubic I3 Mega S no longer prints?
Hello, My Anycubic I3 Mega S has recently stopped printing. As soon as I select the file and click print, the normal print layout appears on the screen, but the motors don't move to the origin point (starting point). The print bed and nozzle don't heat up either. It says 19/0°C and 20/0°C (room temperature,…
How much air is needed for guides made from a 3D printer?
Hello! For my project, I need to print a "tube" into which another part, like a guide rail, fits. However, my first attempt failed because I created the file so it had to fit perfectly and didn't allow for any clearance. How much clearance should I allow so it "slides" but also doesn't wobble? Thanks…
Printing – Why don't the colors match?
Byhealey
I printed some pictures with my printer. But the colors of the pictures look different than they do on the computer. What's causing this? Is there anything I can do about it? I print with an HP inkjet printer. The cartridges haven't been used much yet.
UHU glue for better adhesion in 3D printing?
ByMannyIDK
Can you use regular UHU glue stick as a 3D printer adhesive for better adhesion? For example, for the bed build surface to secure the print and prevent warping. Is UHU suitable? Thanks!
Ahh accepted my proposal. :
First you don’t need anything. Even a second nozzle is present.
If you do everything right, it’ll be forever.
In some tests, the extruder has been somewhat troubled. But as I found out by now, there were only errors in operation.
The filament is inserted until the first residue. Then another 1mm. It is then allowed to move in. It always works.
Wrong it is the clamp to open and try to push it deeper than in conventional models.
What to do later. To buy it is the case.
Or smaller nozzles (I had ordered a 0.2mm nozzle 2 times).
Evtl. there’s a color changer like BambooLab sometime.
A filament dryer is basically not a bad purchase.
But otherwise I don’t mind. Unlike all my other printers, SV08 has everything from home. Even some filament comes along.
Even WLAN, LAN and camera are installed.
PS: By the way, I am so excited about this printer that I consider selling my other printers and getting a second SV08 for the 0.2mm nozzle.
I would like to thank you very much. Through them I came to the idea with the SV08. Thank you very much for your long but very informative answers and it is fun to read them. LG
Which upgrades you want and you need to decide best after you have printed a while with the device and know its weaknesses.
But as an idea, you could expand the printer by an Enraged Rabbit Carrot feeder. This is an open source MMU, i.e. an automatic filament changer. This allows you to print in color, automatically switch to the next reel in the case of a filement runout or automatically combine different plastics (zb PLA and TPU)
https://youtu.be/ccwiylrg7KM
Thank you