Hello, I bought a HF oscillator GM2893 /01 and only later noticed that there is no output for sound reproduction!
My question is, can I install a notice for sound reproduction?
How complex would the project be?
(1 votes)
Loading...Hello Should you simply calculate F= 10 g x 9.81 for the marked task, for example, and do the same for all values? Thank you
So if you want to replace a copper cable with an aluminum cable with a larger cable cross-section or diameter for cost reasons, with 100% of the same conductivity
I don't understand how you get 2.1 (m^3?, l?) per second here. Normally I would need to know the pressure difference at the beginning and end of the horizontal pipe: P1 should be pgh = 1.5m * g * 1260kg/m³ ≈ 18540.9 Pa (the pressure at a given depth in the vertical vessel). The dynamic…
Hello, does the asus vy249hge monitor have speakers Or what is that
hey, can you help me with the following task?
What component does the electronic counting system in these devices, which have been around for decades under the name "bicycle computers," use/how does it work? You attach a magnet to a wheel spoke, but what is the counterpart? A standard reed switch? Is there anything that works reliably even at high speeds?
You just need to connect a speaker at the output. Then you can make the signals audible. A headphone is enough. Then you can experiment.
In the end, you would only make a real small range usable, but you can go to the terminals of a normal audio amplifier with a BNC on Cinch adapter.
Signal amplitude for Cinch is around 0.3V.
Frequency range: 90 kHz to 50 MHz in 6 stages, although there is the possibility to modulate the HF signal, which is probably not in your sense.
for people audible 16Hz to 20kHz
Actually, I didn’t pay attention to this, the thing is not suitable at all.