ByQuntn
Hey,
I'm repairing an old bike and want to replace the brakes. Unfortunately, a screw on the correct brake broke. I have another suitable screw, but it's not attached to the correct brake. I tried to "counter" it while unscrewing it, but it didn't work. Is there a trick? Or is it simply not possible?
Thank you
(Photo 1: broken screw right brake)
(Photo 2: whole screw wrong brake)
for the help! 🙂
(2 votes)
Loading...Hello, I have a scooter (Explorer 50cc) and I'm having a problem with it. I drove it for about six months without any problems. I bought it with low mileage and in good condition. About two months ago, it died for the first time while I was driving. I restarted it and it started running…
The oil light on my 2-stroke Piaggio Liberty 50cc has been lit for a few rides. There's no yellow light, so it's actually red. The scooter is very used and old, and I thought it might be a display error, as it had also been lit red on previous rides (usually until I started driving,…
I drove to work this morning. I usually drive a bit faster, and the oil light came on for a second a couple of times while cornering. I checked the oil, and there's still more than enough. No noise from the engine either. The oil was changed 10,000 kilometers ago. Does anyone have an idea?
Hello, I recently had an accident. Repairs will cost about €5,500 in total. Insurance will cover about €3,000, and I'll have to pay the rest. (During the repair, unrepaired damage was discovered, which is surely from the previous owner, and this will cost about 2500 euros. The metal rod behind the bumper is bent and…
Hello, I want to clean my brake discs because they squeak when I brake, and I was wondering if I can use expensive bike cleaner. It also says it's grease-soluble. LG
Muss der Kettensatz an dem Motorrad erneuert werden? Hab von 2 verschiedenen Werkstätten 2 verschiedene Antworten bekommen. Der eine meint, dass Kettenrad und Ritzel durch sind. Der andere sagt dass man damit noch 5 -10.000 km fahren kann. Bin mir echt unsicher und würds für das “gute Gefühl” wohl tauschen. Vielleicht bekomm ich hier noch…
Warum kombinierst du nicht die ganze Schraube mit der richtigen Bremse?
Kontern heißt zwei Muttern auf einer Achse gegeneinander schrauben. Bei beiden Bremsen sind die beiden Abschlussschrauben gegeneinander gekontert, und zwar so, dass sich die Bremsarme noch frei bewegen können die beiden Schrauben aber nicht mehr.
Man braucht keine speziellen Schlüssel um diese Konterung zu öffnen, lediglich zwei normale Achter (oder Zehner?). Noch nicht einmal das. Beim Zuschrauben brauchst du dann zwei Schlüssel.
verstehe nicht ganz. Einfach mal die Hutmutter vorne lösen, dann die normale Mutter, dann kannst Du die beiden Schenkel vom Bremsbolzen abnehmen.
Ev. hilft das Bild weiter
Das ist doch zu einfach….
Was?
Du hast die Ironie meines Kommentares nicht verstanden…!