ByAxprilia
Hello!
I have a 2018 Aprilia SR 50 with a carburetor, which hasn't been modified yet, and I recently noticed a rattling and clattering noise in the front/middle section. The noise is clearly not coming from the variator, but rather from the alternator and surrounding area. See picture.
What could it be? It doesn't bother me, but I'd like to take care of the scooter and keep it in top condition.
Thank you! Best regards
(1 votes)
Loading...Hello, I drive a 4-stroke 50cc scooter and my question is, can I use 0W-40 oil or should I get a different one? Thanks.
I cleaned my moped thoroughly, right down to the last corners, with a pressure washer. Now it won't start. It also starts much too easily, and the "resistance" you usually feel when starting is completely gone.
Yesterday I changed my spark plug and cleaned the engine and exhaust with brake cleaner. Today, when I started it, smoke came out of the exhaust, which is normal because it had been standing for a day. The problem, however, is that at higher revs, around 8k, smoke comes out of the engine. Now I'm…
Hello, I bought a scooter today that normally goes 45 km/h but it has been throttled down to 25 km/h. Can I drive it with my moped/moped license?
Good morning I've been experiencing a loss of power for a few days, and sometimes I can just hear the spark. I checked the ignition and the timing is correct when idling, but it changes when accelerating. I have a Hercules Prima GT with a CDI. What could be causing this?
Hallo. Muss man beim Motorrad die Vergaser neu synchronisieren, wenn man die Gasgriffamatur tauscht? Ich hab eine alte Guzzi und würde die Stück für Stück umbauen und jetzt is halt die Frage, ob sich da was an den Zügen soweit ändert, dass man da nochmal nachstellen müsste. LG
I think some foreign body has come into your engine cladding and comes into contact with the alternator
So disassemble and check for foreign bodies?
For the first time, you may already see what it is. Whatever can be, some pebble stone has come into your frame and shoves out of the engine due to the vibration, that was more often the case with me. If you’re a compressor, you’re just going over with compressed air