RGB Fan Hub?
Hey Leute,
Ich wollte mir ein Gehäuse kaufen und habe leider gesehen das dieses kein Fan Hub besitzt (Gehäuse von NZXT).
Ich habe mir überlegt ein Fan Hub von irgendeiner Marke zu kaufen und zu nutzten das Problem ist ob dieses funktioniert:
Müssen alle Lüfter von dem gleichen Hersteller sein oder können es von unterschiedliche Marken sein?
Wenn ich 9 Lüfter in mein Gehäuse installiert habe wie schließe ich sie an?
P.S. Falls ihr ein Gehäuse mir vorschlagen könnt sollte es eins wie unten sein:
Merkmale:
mindestens 360mm lang für eine Grafikkarte
ATX Mainboard
Fan Hub für 6-9 Lüfter (muss nicht unbedingt 9 sein)
LG
(2 votes)
Loading...
I would have an alternative! =)
https://geizhals.de/wishlists/4084597
https://www.youtube.com/watch?v=Hne3SoBoAuQ&list=WL
The fans can be x arbitrary, they do not have to be from the same manufacturer. Make sure you have 3 or 4 pin plugs. Accordingly, the stroke must be designed.
The fans of my setup are Daisy Chain correspondingly little cable you have to move.
With your setup, your stroke must be sufficiently dimensioned to be able to control all fans with the stroke. What also answers your question at the same time, how to connect/restructure it.
does the case what you recommended me also have a fan hub? because in the video I didn’t see a unfortunately. Is this model also supplied with fan?
PS: Having updated the link, had accidentally still an older link in the buffer store.
I don’t think so. But you also have to buy a 4 pin hub here. Most included are 3 pin.
is not expensive > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
It would even exist with a remote condition.
and what is the difference between a 3 pin or 4 pin?
All LEDs in a 4-pin RGB shine simultaneously in the same color and have no color difference.
With the 3 pins, it is often difficult to let that shine in the same color.
No, that’s not a problem. The connection is the same. =)
below must 140er loudly lead this is a problem for the fan hub?
The 140s are optional. I’d make 120s everywhere. They’re 120s, and I’d make 120s everywhere else.
I have looked back the front & back are 120mm fan and down are 140mm fan D.h. 2x 140mm fan & 7x 120mm fan
I don’t have water cooling (I just need a new pc where my prehanded atx motherboard and new netzil and graphics card fits
(Ups on wrong message replied xD)
Sorry, these are 4 pin fans:
NZXT F Series F120 RGB Core, Matte Black, Black, 120mm
I’m just looking. That means you need a 4 pin hub. Make sure your AIO has installed the same fan. Or do you have a block cooler?
The housing fans are 3 pins. If your AIO is also 3 pin, a 3 pin stroke is enough. If you don’t need a hybrid hub with 3 and 4 pins.
What AIO do you want to build?
What fan hub do I need this now when I get this case? Do you know that?
Yes exactly so =)
do you think the air is like that?
Yes, but vice versa. There’s a need for fresh air at the bottom. I would also use the AIO with the display as exhaust air. It’s better for your graphics card.
6 should be sufficient for the pc (3 below for the output) and (3 front for the input).
You’d have to build fans down the case. Without that, the AirFlow is not so good. The back then doesn’t have to be. Optionally you can also take the three installed ones for below. Look how it’s with the tmeps. I don’t think you have any problems in winter. But in summer, that could be hot. Evtl. you saved a few groschen until summer to buy the other 3-4.
I also have to pay attention to that I didn’t have much to buy so a budet for housing e.g. 110 euro in the case I make an exception but still ventilator to buy is already expensive that is my question how many ventilators would be the most necessary to have a good air train (below/oben/etc.)
I would like the third one best. =)
I wanted to add a Rx 7900 XT Asus tuf, that is, here it would be optimal to attach a graphics card holding, but where is the question.
my first choice:
https://www.amazon.de/dp/B09RPYGVBW/?coliid=I1QGXG9BNJYSX6&colid=3OXCQGDJKA34M&ref_=list_c_wl_lv_ov_lig_dp_it&th=1
my second choice:
https://www.amazon.de/dp/B0CQCHYH1R/?coliid=I1RB03YBY1WGF0&colid=3OXCQGDJKA34M&ref_=list_c_wl_lv_ov_lig_dp_it&th=1
my third choice:
Other
Which would you recommend to me because at the 1st it is difficult to install when I install ventilator below
There are 3 fans and another 3 with the AIO, i.e. you would have to buy four more.
The setup of me is already extreme high-end and unfortunately costs 532€.
There’s a better solution.
Okay, there would be 10 fans recommended. The ones below are most important in such a case. They supply the air. I’d put everyone else in the air.
my selection to the case was this:
https://www.amazon.de/dp/B0CN5LSXDF/?coliid=IIRUFDJOKMZP&colid=1EI262ASAB2MM&psc=1&ref_=list_c_wl_lv_lig_dp_it
what do you think is that good or you have a better NZXT case possibly with Fan Hub etc.
OK, this is the H9, since fans are actually supplied. Okay, that’s actually much cheaper.
I have an LCD display and are capable of Daisy Chain.
Well, if you want the case, I’d already buy NZXT fans.
AIO is the water cooling for the CPU. (All in one)
I once looked at the case what you sent me as a link are unfortunately no fans included, so I would have to be separately approx. 6 fans buy and 1x from this RGB hub. I once looked at a few videos and used an RGB hub looked very complicated especially if you want to have more than 3.
what do you mean by AIO?
I think that’s just as much as your setup. You need less fans and the AIO is cheaper + you can also use the three fans.
If these aren’t Daisy Chain then 6-7 slots. FAN ARGHB HUB is the same. You just have to pay attention to which fans you are building. If you have 3 pin fans you need a 3 pin hub, then a 4 pin hub at 4 pin.
You may have. A good and affordable variant for fans? Because 20€ per fan is already krass 😅
Should I get the “FAN ARGB HUB” or “FAN HUB”? And how much do I need from them if I want to bring 6-7 ventilators?
https://geizhals.at/4739857946
I also have 8 connectors and you tie it with a sata cable and a 3pin and a fan kanel on the motherboard. The fans can be of different brands.