Restrict Sachs scooter 50cc to 25kmh?
Hello, I have a Sachs 50cc and would like to restrict it to 25 km/h. What options do I have? Install a different CDI, or is a throttle slide sufficient?
Hello, I have a Sachs 50cc and would like to restrict it to 25 km/h. What options do I have? Install a different CDI, or is a throttle slide sufficient?
The carburetor is dripping in a masked area. Do I need to put a bracket in front of the carburetor or should it work normally?
Good morning, Are there cars that are better or equivalent to a Ford Mondeo? It should be a large station wagon, like the Mondeo.
Hello, I have the following problem: My yamasaki ym50-8b has no spark. The CDI, ignition coil, spark plug, and ignition cable were all replaced, and yet there's still no spark. Power is getting through, though. And the battery is full, and the cables have also been checked. When you start it up the motor runs…
Almost everything on the scooter is new, new crankshaft, new bearings, new cylinder, new carburetor, jets are clean, there is plenty of petrol, spark plug is also good, new spark plug connector, new membrane and intake manifold, new seals, everything is sealed but the air filter is broken, otherwise everything is in top condition but…
I've dreamed of a Porsche since I was a child. I'm 22 now and I want to buy a Porsche. It's a 1999 model with 130,000 km. It costs about €25,000. The car is almost 20 years old, and people say that even 10-year-old cars are really starting to get old. Is something like that…
If I get my A2 driving license (motorcycle), do I have to take the first aid course again? I've had my B driving license for 4 years now.
Hello,
You have to buy a throttle set on the Internet. Then the partial review is that the TÜV must be submitted. Without this opinion, the throttle at 25 Kmh is not recognized by the authorities… Such throttle kits are available for many providers such as Alpha Technology… The total costs will be around 300€ with TÜV acceptance.
A complete throttle set incl parts check that is only permitted for your chassis number. Installations – then to the TÜV and road traffic office. Cost with installation inside workshop-round 350€.