Resin print keeps coming off the plate?

mangolionBymangolion

Hi,

I have an Elegoo Saturn 3 and use the Anycubic Basic Resin in grey.

Now I'm constantly having the problem (even with a completely different resin) that the print keeps coming loose at the corners. I've leveled it countless times (this is my third printer, I definitely did it right), checked the Z-axis (no play), and completely disassembled the plate (no abnormalities), and I still can't get rid of the problem.

Settings:

bottom layer: 5 at 40 seconds

normal layer: 0.05 mm at 2.6 seconds

Light-Off delay: 1 second

When trying to loosen the front screw, I noticed several times that it was almost loose, as if it were coming off during printing because the plate was moving. Is it the clamping sleeve or the screw? Neither has any marks, dents, etc.

It can't be the size of the print, because it worked just a few weeks ago.

Thanks in advance for answers.

(3 votes)
Loading...

Similar Posts

Who can recommend a good black and white laser printer?

Bygri1su

Our HP Laserjet P2055d has served us faithfully for many years, but now it is becoming increasingly weaker and more and more often. We are therefore looking for a cost-effective successor. Requirements: Suitable for office use WiFi Duplex printing Dimensions approx. 360 x 370 x 250 mm (extendable from 360 mm to max. 380 mm)…

Former but uninstalled HP printer messes up EPSON printer?

ByFungus482

Hello, before I got my new EPSON printer, I was using an HP Deskjet printer. I uninstalled it properly, at least in my opinion, and removed it as a printer. Now, however, my Epson keeps receiving random print jobs, which I was able to attribute to HP through internet research. The new Epson now prints…

Printer?

ByOuemgee

Hello, I just arrived in Germany. I wrote a letter on my computer, and since I don't have a printer, I don't know where I can even get this file printed on A4 paper? (PDF or Word file) Where do you go to get something printed in the cities in Germany if you don't have…

Subscribe
Notify of
1 Answer
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
tomgun
tomgun
3 months ago

I’ve got the old Elegoo Mars and I’ve cut my record since that I’ve never had any liability problems again.

Only easy to grind with 1000 sandpaper to make it a little rough.

Meanwhile, I glued magnetic plates in between. They gave them to Sovol. But I also ground the metal plates.

Of course, the screw must not be released. I’d definitely keep an eye on that. If she gets dressed correctly, she can’t get loose.

Or replace the screw. It should be in the building market.

1