Is it possible to upgrade the climate control (dial dials) on the 2011 Seat Ibiza SC 6J to a digital climate control? If so, does anyone have instructions or what is needed for this?
(1 votes)
Loading...Hello, I went to the MOT today and was confident I would pass, but when it came to the emissions test, the measured value at idle/idle speed was too high. The car is a 1992 Mercedes W124 200e. Everything else was fine, including the emissions test at higher revs. What's going on? thank you in…
Hello, on my W211, a red battery message sometimes lights up on the display, saying "See a workshop." When the car is at full throttle and under load, it goes into emergency mode. I've already had the alternator checked, and that doesn't indicate the problem, and both batteries are relatively new.
Good day, Is it possible to weld a 2-3mm round rod (an old frame from a small parasol, so I assume it's regular metal)? So that the connections are quite robust and can withstand even "heavier" loads. I have an old welder rated for up to 110A, I think. I've done very little welding so…
The following: The repair shop says there's an update for my engine control unit. Without a letter, without a callback, they'll install it alongside the actual repair. Am I obligated to do it? The receptionist at the dealership said "absolutely," which I can't imagine. It makes sense for the warranty, but otherwise, it would be…
I'm about to buy a VW Golf Mk7, 1.4 TSI with 122 hp (petrol engine). It has a turbocharger. It would be my first time driving a turbocharger. Would the following distance be sufficient to avoid destroying the turbocharger within two months? *exaggerated* 1.1 km to the motorway – in town – (in morning traffic…
Good day, We want to build a large carnival float for next year that will hold around 20 people. I'm wondering what the best way to build a secure wooden frame around and onto the float is. Because it also needs to be elevated? Would it be best to rebuild the float with wood on…
I wouldn’t rely on it, usually it’s that the parts of the knobs are connected while the other works electrically.
Even WENN the turn button is electric, and WENN the plug 1:1 fits, I would not rely on anything here, because for more than 30 years the motto has been valid in the automobilinudstrie: just because the plug fits, it does not have to function the same way. the iso plug for carradio is one of the best games.
I would get the etzhold, for example. a wrench book, suitable for the respective car, in which schematics can also be found.
that then reveals whether, better to say with which wall can be converted.
lg, anna
If you look at the plugs/connections on the back of the screens, you can quickly answer the question yourself.
Plugs do not fit so I count as snap as no
You certainly lack the corresponding control unit and the sensors. retrofitting technically possible, but economical Mumpitz