RAID 5 vs. RAID 6 Unterschied?

Hallo zusammen,

ich bin aktuell dabei alten Prüfungsaufgaben der IHK zu bearbeiten und bin auf folgende Aufgabe gestoßen:

Meine Lösung war nun:

  • Benötigte Festplatten: 11x 2 TiB (ges. für beide Arrays zusammen).
  • Pro Array gibt es 2x Paritätsfestplatten (da es ja ein RAID 6 ist und er unterschied zum RAID 5 ist ja, 2x Paritätsplatten, statt nur eine)
  • Im 1. Array ist es also 8 Festplatten, mit 2x Parität, also 8-2 = 6 Festplatten sind 6*2 = 12 TiB
  • Im 2. Array dann 3 Festplatten, mit 2x Parität, also 3-2 = 1 Festplatte sind 1*2 = 2 TiB um auf die Gesamtkapazität von mind. 13 TiB zu gelangen

In der Lösung der IHK war folgender Hinweis gegeben:

=> Laut dieser Grafik hat das RAID 6 nur eine Hot-Spare?

Ich kenne RAID 6 so, dass es 2x Paritätsfestplatten hat, so, dass max. 2 Festplatten ausfallen können.

Die Rechnung der IHK:

Die IHK berechnet nur eine Paritätsfestplatte? Wie kann das sein? Das ist dann noch ein RAID 5 und kein RAID 6?

Kann mir das einer erklären?

(1 votes)
Loading...

Similar Posts

Subscribe
Notify of
2 Answers
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
flauski
11 months ago

I think you have a problem with the terms. Hot spare drives are not part of the raid. These are empty drives that can jump in immediately when a drive fails in the Raid.

And then the calculation of the solution comes also. You need 13TiB, which is 7 drives. Then 2 (marked red) for Raid 6 are added and then 1 (marked green) for the hot spa. And then you come to the solution 10.

evtldocha
11 months ago

I think you need to confuse plates(capacity) for parity information and hot saving plates.

https://de.wikipedia.org/wiki/RAID#RAID_6:_Block-Level_Striping_mit_doppelt_distributed_Parit%C3%A4tsinformation

RAID 6 has double parity information, RAID 5 only simple – see also the label Ap1, Ap2, Bp1, Bp2,… in the message image of the solution.