Pc zurückgesetzt und schwarzes bild?
Hallo ich habe gestern mein pc zurückgesetzt mit der windows funktion ich habe eingestellt das alles gelöscht und gereinigt werden soll heute morgen als ich auf stand ich resettet ihn über nacht wollte ich schauen ob alles recht ist und da ist mir aufgefallen das er an ist aber kein bild von sich gibt ich dachte mir nicht bei schaltet ihn aus und geh zur schule ich kaufte mir neue teile baute diese ein startete den pc nochmal und wieder schwarz ich versuchte einen bios reset dieser brachte mich aber such nicht weiter
(1 votes)
Loading...
Your mistake was, 1. that you selected the “cleaning” of the drive
and 2.) that you went to sleep on it.
It would be right if you were going as shown below. – See:
The “cleaning” should make it harder to recover deleted data if the laptop/PC is to be sold.
Now you’ll have to reinstall your Windows classic.
Image to my comment below:
But I have to come to the bios or not and this is not shown to me or is it different?
If you have the MSI A320M PRO-VD/S, you will come to the PC Start with pressing the F11– button in Boat menu– See picture above.
This depends on your BIOS. – It would be easier to change the boot order if your BIOS had one.
Which motherboard do you have?
Then you now know how to get to your BIOS and the boot menu.
Yes is by gigabyte
Is there B450M Gaming motherboard from Gigabyte? – Then to open BIOS at the PC start :– Press button and for the Boat menu F12-Button.
The manufacturer name will certainly be indicated somewhere on the motherboard.
The problem is, however, also I really don’t see any mainboard brand not only black you think the trz will come into the bios
I have the B450M Gaming mainboard
windows!
I have entered the windows to reinstall
usb ubuntu stick and over with it windows is a bit too. the elite.
Hello, have the same problem since yesterday and it cannot be on the monitor. Have also tested another gpu and it does not work. Got the same mainboard thinking about it. But even need a solution
then try out hdmi monitor alone. if you nix then try out the other connections. it can’t be you don’t get into the bios because it always happens before the start.
I only put a whole time a leuft over hdmi the other I know the sign not for is definitely not a vga
are they running over hdmi displayport or even vga?
I have 2 monitors both go not I think the problem came up by the reset has what might do with the cloud doenload this I had given when installing windows
ok then it’s a problem on the monitor itself. check the plugs and the monitor menus or input.
Has unfortunately search not worked
mainboard battery remove and restart and then the bios should be back law and you should see a screen again
The problem is that you don’t get into the bios because you don’t even see a scree
for what do you have a booter manager simply reboot the position in the bios and select stick.
But still what my power button in front and the usb ports don’t work with it