Motorrad Neues Bremslicht richtig anschließen?

flosumoByflosumo

Servus, bei meiner 125er mit ABS habe ich ein neues Rücklicht montiert, nur das Problem ist das Bremslicht funktioniert nicht, man kann es so anschließen, dass entweder das bremslicht geht oder das Rücklicht aber nicht beides. Ich habe schon versucht einen Widerstand einzubauen und habe da auch alles versucht, ich weiß nicht woran es noch liegen könnte.

Wäre cool wenn jemand eine Lösung findet

(1 votes)
Loading...

Similar Posts

Subscribe
Notify of
6 Answers
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Tellensohn
Tellensohn
3 years ago

Salmon

If you turn on the stand light without the brake light being connected, does it work? When you catch the brake light and actuate the brake, then the stand light will extinguish and it will burn the brake light?

If this is the case, the mass is insufficient. Both lamps go over the same ground at the back. Search this, clean the contact and reassemble it and the problem is solved.

Tellenone

1
flosumo
Author
flosumo
3 years ago
Reply to  Tellensohn

Okay I’ll try it out thanks

0
flosumo
Author
flosumo
3 years ago
Reply to  Tellensohn

Thanks, it worked real. I thought I had to get it to the workshop 😂

0
Tellensohn
Tellensohn
3 years ago
Reply to  flosumo

Salmon

Actually, most power panels aren’t power panels, they’re usually mass panels. In motorcycles, this is even more common than in cars. In the case of motorcycles, the ground points are always exposed to the weather and therefore tend to corrosion.

I hope you have some nice motorcycle weather for a while and can enjoy biking.

Tellenone

1
xDNelli01
xDNelli01
3 years ago

go to the workshop

1
flosumo
Author
flosumo
3 years ago
Reply to  xDNelli01

Thanks for the tip

0