Motherboard doesn't recognize CPU?
Good Morning,
Today I wanted to replace the thermal paste due to temperature problems.
Without much force I ripped the cooler and CPU off the socket 😬.
There are no hidden pins etc. visible on the CPU, but my mainboard no longer recognizes my CPU.
I think the slider is a bit stiff and difficult to move back and forth with the CPU inside. Is there a possibility that the motherboard socket has a slight movement and I can fix it myself?
CPU: Ryzen 5600x
MB: mpg 550 Gaming plus am4
(3 rating, 3 votes, rated)You need to be a registered member to rate this.
Loading...
Good Morning! It sounds like the socket or contacts could have been damaged when removing the CPU. carefully check the pins and the base. If the slide is crocheted, the base could be defective. Repair is difficult, usually only helps a new motherboard.
Your answer was my solution 😂 helped the pedestal while pushing something (you can do if the motherboard is replaced because defective) and Zack CPU recognized.
Photos from the CPU + socket would be helpful.
The fact that the CPU sticks to the cooler is quite possible.
I added the post to the pictures 😁 but did not note the paste, which came to this