Similar Posts

Subscribe
Notify of
4 Answers
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Krabat693
Krabat693
4 months ago

how do I insert my pump from the AIO correctly. an adapted ventilator curve

No way. The flow must not be too low because otherwise you have practically no cooling.

or go through to 100%

100% will not be necessary. But a fixed speed is the right approach.

You can try to reduce the speed a little so that pumping is not too annoying. With a CPU benchmark, you can check whether the cooling performance is not affected.

0
ChickenWing10
Author
ChickenWing10
4 months ago
Reply to  Krabat693

okd let them go through jz to 65% unbd I can let the fans run from the aio with the gal ventilator curve as from the fans

0
Krabat693
Krabat693
4 months ago
Reply to  ChickenWing10

The fans from the radiator can be controlled via a fan curve indicating the CPU temperature.

… With a custom water cooling, you would regulate it using the water temperature, but this option does not exist for AIOs.

0
Maik2325
Maik2325
4 months ago

Too low is not good.
If you don’t hear the pump at 100%, leave it at 100%.
But normally you hear them etc, start at 50% and set a good fan curve.

1