Looking for a time relay with delayed start and FIXED running time (timer)?
Hello everyone,
I need a time relay with the following properties:
- Input (coil) for 230VAC
- Potential-free relay contact (normally open or changeover)
- Ideal for DIN rail mounting
- Relay should pick up after an adjustable (short) delay
- Relay should drop out after an adjustable time OR when the 230VAC input voltage is removed
I haven't found anything like this from the usual manufacturers like Finder or Eltako.
There are some where you can set two times, but the switch-off delay only starts when the input voltage is lost…that shouldn't be the case in my case.
Roughly speaking, this would be a staircase light switch that also switches on with a delay.
Many thanks for any suggestions & best regards
Christian
(0 rating, 0 votes, rated)You need to be a registered member to rate this.
Loading...
And if you just turn two stinky time relays? The first relay ensures the switch-on delay and the output of the relay 2 is connected immediately when the signal comes from the relay 1 and drops after a set time T 2 or omission of the supply voltage.
The actual consumer then hangs at the output of relay 2.
That would be the "emergency solution" in the event that there is really no such relay (which looks sadly at the moment). You're not just bargaining. Easily 30-40 euros for a simple time relay.
Have now obtained a Siemens logo for 40,- € incl. Shipping 🙂
That's good. Well, control tasks are digitally still cheaper than with old analog technology. Can the logo also switch the required power levels?