Kühlmittel läuft nicht nach unten?
Halle miteinander, ich habe vorhin meine Kühlmittelflüssigkeit aufgefüllt weil die kaum noch vorhanden war. Beim auffüllen ist jedoch was komisches passiert. Der Behälter hat sich nur oberhalb befüllt aber unterhalb gar nicht. Das Kühlmittel ist jetzt am Rand des Behälters aber läuft nicht weiter. Ich habe den Motor gestartet und die Heizung angeschmissen aber der Stand stieg sogar bisschen an. Kann einer erklären was das ist und wie ich das Beheben kann ohne vielleicht alles ablaufen zu lassen ?
Perhaps the air under the coolant cannot rise, e.g. because dirt is in the hose. You could try carefully with a flexible hose through the coolant to the air, with some luck swallowing it and running down while the air rises in the hose. Keep the tube at the top when it is introduced so that it remains free of cooling liquid and when the end is under the liquid open.
Sounds like a good idea I will definitely try out
What is it for a vehicle when too little was inside and you can fill it up that your cooling system needs to vent. There may be. Deaerators…
Honda Civic 8 generation. Didn’t find any venting screw. But it can also be that it is further down.
…Google times cooling system vent Hond Civic there comes quite a lot
Most likely, the system must be vented so that the cooling liquid can be licked.
Could be good but strange that it didn’t change when the other openings were on or?