Kompatible Gehöuse/Case?

Hello

You need an ATX case because you take an ATX motherboard that is too large for a μATX or ITX case. Then the ATX case must be so large, so it also fits a graphics card with a length of more than 30.4cm, because this is the long chosen XFX Speedster RX 6700XT SWFT 309 graphics card.

https://www.xfxforce.com/shop/xfx-speedster-swft309-amd-radeon-tm-rx-6700xt-core-gaming-graphics-card-with-12gb-gdddr6-hdmi-3xdp-amd-rdna-tm-2-

But please don’t take a case where the graphics card just fits in, but one that has a little more space to make sure the graphics card fits in.

https://www.fractal-design.com/products/cases/focus/focus-g/

https://www.mindfactory.de/product_info.php/Fractal-Design-Focus-G-mit-Sichtfenster-Midi-Tower-ohne-Netzteil-schwar_1174015.html

https://www.mindfactory.de/product_info.php/Fractal-Design-Focus-G-mit-Sichtfenster-Midi-Tower-ohne-Netzteil-blau_1188341.html

https://www.mindfactory.de/product_info.php/Fractal-Design-Focus-G-mit-Sichtfenster-Midi-Tower-ohne-Netzteil-rot_1188342.html

Or:

https://kolink.eu/hungarian/case/midi-tower-1/observatory-mx-mesh-1.html

https://www.mindfactory.de/product_info.php/Kolink-Observatory-MX-Mesh-ARGB-Midi-Tower-schwarz_1516872.html

https://www.mindfactory.de/product_info.php/Kolink-Observatory-MX-Mesh-ARGB-Midi-Tower-schwarz-weiss_1516870.html

https://www.mindfactory.de/product_info.php/Kolink-Observatory-MX-Mesh-ARGB-Midi-Tower-weiss_1516869.html

Or:

https://www.mindfactory.de/product_info.php/Fractal-Design-Focus-2-Black-TG-Clear-Tint_1463845.html

Or:

https://www.mindfactory.de/product_info.php/LC-Power-MidiTower-ATX-804B-Gaming-USB3-2-Audio-o-Netzteil-Obsession-X_1458685.html

Or:

https://kolink.eu/german/geh%25c3%25a4use/midi-tower-1/observatory-series/observatory-lite-mesh.html

https://www.mindfactory.de/product_info.php/Kolink-International-Observatory-Lite-Mesh-mit-Sichtfenster-Midi-Tower-_1370493.html

Or:

https://www.mindfactory.de/product_info.php/LC-Power-Gehaeuse-Gaming-806W-Crosswind-X-White-retail_1512285.html

Then I have a few more notes:

• The SSD is not well selected. For a PCIe 4.0 SSD it is relatively slow and too expensive. Take a look at the Lexar NM790, also an M.2 PCIe 4.0 x4 SSD, which is much faster than the NM710 and also just a little more.
• The 700W power supply is significantly oversized and therefore also too expensive. A PC that consists of the parts on your “Wunschliste” consumes between 350 and 400W under full load, but in no case any more and that only because the RX 6700XT graphics card burns up to 230W. Even with a reserve for a stronger processor and a stronger graphics card that burns even more than 230W, a 550 to 600W power supply would be completely sufficient and also cheaper.
• It cannot be guaranteed in advance that the processor must also run with the DDR4-3600 RAM, with activated XMP and at 3600MT/s storage speed.

The storage controller in the processor you want to use is designed only for operation with up to DDR4-3200 RAM modules, when fitted with a storage bank per storage channel.

https://www.amd.com/en/product/11831

Max Memory Speed:

2x1R – DDR4-3200

2x2R – DDR4-3200

4x1R – GDR4-2933

4x2R – GDR4-2667

• 2x1R – Dual Channel with 2 Single Rank (1R) RAM Module
• 2x2R – Dual Channel with 2 Dual Rank (2R) RAM Modules
• 4x1R – Dual Channel with 4 Single Rank (1R) RAM Modules
• 4x2R – Dual Channel with 4 Dual Rank (2R) RAM Modules

For storage speeds, which can then only be used with faster RAM modules, the memory controller is overclocked in the processor used, which can function, but which does not have to function in advance guaranteed and which reduces the life expectancy of the overclocked components. This would then affect the processor and the XMP overclocking RAM modules.

It also does not matter which memory speeds can be set by the BIOS/UEFI of the motherboard at the memory controller in the processor and for which the RAM modules are designed so high memory speed. If the memory controller does not play in the processor used during the MEM overclocking, it becomes nix.

In addition, the maximum achievable storage speed decreases, the more storage banks (rank) are used per storage channel. This is due to the additional load of the memory controller by more memory banks and to the physical properties of the memory bus in the high-frequency range. It is easier to say that higher storage speeds can be achieved with two RAM modules, as with four RAM modules. This should be considered especially at MEM overclocking.

A memory bank is not always a RAM module. There are single rank RAM modules, since one memory bank corresponds to a complete RAM module and there are RAM modules on which are already two memory banks. These are Dual Rank RAM modules. A Dual Rank RAM module is roughly the same as two single Rank RAM modules used in single channel configuration.

Whether and how high the memory controller can be overclocked in a specific processor cannot be predicted, because this depends on the individual properties of each individual processor, also from the same series. One can do more and the other can’t stop. This means that even if the MEM overclocking works with other functions that cannot be closed from it, which must be the same in any further case.

If you want to try MEM overclocking with higher storage speeds, faster XMP RAM modules and possibly with more than two RAM modules, you can do this with all the problems that can result from it. This is your decision and not my recommendation.

mfG computer tomb

Add to comment:

https://www.mindfactory.de/shopping_cart.php/basket_action/load_basket_extern/id/adaa8221d925802a9b50980d079c75d4e7c22fbbd85d66b692

Have fun and success during crafting and happy festive days.