Similar Posts
Multimeter broken?
I used a multimeter and plugged it into the socket for alternating current. Did that work for you at 233 volts? I have no idea why I did that; I was just bored and wanted to try it out. Then I had the brilliant idea of simply turning the multimeter 360°. So, away from alternating…
How could one technically perform electrotherapy if the power were to fail (and one could only use solar energy)?
Hello, So let's assume that all the electricity would fail and the only way to generate electricity would be with the help of solar energy. And you would count away the power bank as another aid. Would it even be technically possible to carry out electrotherapy (in terms of electricity) using solar panels? If so,…
Permittivities and electric field?
Hello everyone, Unfortunately, I still don't fully understand the dependence of the electric field strength on the permittivity ε. It would be very helpful if someone could explain it to me using this specific example. "A well-conducting metal sphere with permittivity ε_1 is located in an electric field. Which statement is correct? ε_1 = ε_2…
Can the circuit be built like this?
ByJimmy040
Hello, I'm working on a project at school where I have to build a self-contained power supply to power LEDs. I have one 6V, 1W solar panel, one charge controller (input: 6-36V) and one (output: 4-32V), and one 6V, 2200mAh battery. I was wondering if it would be possible to connect the circuit directly to…
Open circuit voltage and short circuit current in the DC circuit?
How do I calculate the open-circuit voltage, the short-circuit current, the resistance of the load resistor, and the voltage across the internal resistor given the following circuit? Many thanks and best regards
Light distribution graphic interpretation?
Hello, Can someone interpret these two graphs for me? I wanted to buy some lights for my office. I'm not sure whether to get 3000K (warm white) or 4000K (neutral). However, I found the following graphs, which I don't understand. 4000K is supposed to have a stronger green component than warm white light, but why…
The water drops pass into the collecting container or bag and moisten the dust in it, so that it may muffle. That’s all. The few drops do not get into the electrics, for this it would have to be more water, some zig ml depending on the vacuum cleaner technology and model. And since these fermentors have a grounding, the power strike is as good as impossible, especially since the housings are often made of plastic, i.e. non-conducting.
HI
No. I used to have some water in my head. Doesn’t fit, it’s just getting wet in the bag.
LG Maggy
No, it doesn’t happen except that the vacuum cleaner can mold.
No, there’s nothing happening.
If you try to suck Tau from an electric pasture fence, that should work.
The one that has to lead current at the moment!
ACH?!
You’re probably also someone who shows firefighters that you can only extinguish fire with a hose when water is pumped through, gelle? You must be smart.
This really makes the decisive difference.
It would have been useful to mention the vacuum cleaner. If you simply read the question, you can easily assume that you want to suck water, for example by means of a straw.
Of course, if you absorb it from a non-insulated electrical line.
However, this would also have to lead electricity.
I wanted to express it with “electric line”.
or to be called electrically…
https://de.wikipedia.org/wiki/Leiter_(Physik)#Electrical_Leiter
So it is enough if the electrical conductor suitable is to be electric.
There has been no talk of a vacuum cleaner.
Is it really dangerous with some water drops now? I’ll talk about it when it’s water-dropped on the floor and the vacuum cleaner’s going over.
Is an electrical line that does not conduct a current, an electrical line or simply a line?
Okay. But electrical lines also have on/off switches.