Kann ich von 225/50 R17 auf 225/45 R17 wechseln?
Kann ich von 225 50/R17 auf 225 45/ R17 wechseln?
Kann ich von 225 50/R17 auf 225 45/ R17 wechseln?
Servus Leute, kann man bei einem star einen s51 motor einbauen? Falls ja kriegt man das auch eingetragen? Danke im voraus LG Ludiwg
Just popped into my head. which would be more fuel-efficient? assuming we have a 5-speed, 1) 70kmh at about 2200 rpm for 2km 2) 90kmh at about 3000rpm for 2km 1) has less rpm = less injection? However, less km/h = slower = engine works longer 2) has more kmh = faster = engine works…
Also ich wollte heute über die Straße gehen habe aber gesehen dass ein Auto kommt, bin aber trotzdem rüber gegangen weil dort ein Zebrastreifen war. Der Typ hat mich fast überfahren, hat wie verrückt gehupt und mich auch noch beschimpft. Aber muss ER nicht eigentlich stehen bleiben wenn da ein Zebrastreifen ist? Da war keine…
Hallo, ich habe mir vor ein paar Monaten ein E46 Cabrio von einem Freund sehr günstig gekauft. Das Auto ist in einem guten Zustand und macht echt Spaß, jedoch beim hören von Musik hört der Spaß auf. Das Auto hat keine besondere Ausstattung, also auch das “schlechteste” Soundsystem. Ich kenne jemand der mir das alles…
Hallo Community! 😉 Ich suche hier mein erstes Auto. Habe schon rumgeschaut, und als Kandidaten steht der Ford Fiesta und der Renault Twingo. Ich würde beide gerne ab Bj. 2001 kaufen. Leider kann ich mich nicht wirklich entscheiden. Einerseits ist der Twingo sehr stabil, nicht so rostanfällig, verbraucht weniger, ist aber sehr karg und hat…
If the tyre size is listed in the COC, you can use it.
However, the speedometer will display a higher speed than you actually drive due to the smaller rolling circumference.
Interesting page: https://tiresize.com/comparison/
You can
Question is: May you
Say: Do the rims for this tyre size have an approval on your car!?
Yes, they did!
Are you sure? These are over 6% difference in the rolling circumference.
I think that 245/45 is required. The deviation at nem 225 is too big
225 width with 45 or 50 ratios are -3.5% difference in tire circumference
I don’t think it’s allowed. There is always intercepted with the width
…if the FS has changed to 225/45 R17 quietly and secretly at the second size of 205/45 R17, you are indeed right;)
Sound Calculator 3.5% on the net
With the diameter perhaps, with the rolling circumference, 6.2% are less.
3.5%
And even that comes to me too much
It always comes to the car, everything that was available as standard is allowed.
Or, of course, if it has a release from the manufacturer ^^
Just ask your manufacturer for that.
If not standard, it is not allowed and the wrong ripening point. :
If you have a mounting machine, you can. Because of the different roll circumference, you will probably not be allowed.
Technically it is possible. Whether it is permissible is on another sheet.
what do the vehicle papers say?