I want to buy a WLtoys 144010 and tune it directly to 3s? Which 3s battery would be suitable?
I want to get one of these because I was impressed by Jonny Hand. But a 2s isn't enough for me; I want to test its strengths. Is there anything I need to be aware of? I've read a lot about their RC cars smelling bad or not working. Thanks in advance.
(1 rating, 1 votes, rated)You need to be a registered member to rate this.
Loading...
The « Hacker Lipo 2400mah » is very small and 11.1 volts on 3 cells, I have been in use for a long time and it is very reliable. You need to note the connection and you need a special charger for strong batteries, which connection do you have on your WL toys? If you have any questions, you can contact me, I've been complaining for a long time with model construction
But isn't the RC car set to 7.4V? The standard battery (2s1500mAh) has only 7.4V
A normal 3S lipo always has around the 11.1 volts, with a 1:14 volts is usually the maximum power. However, if you want to buy and install a 3s brushless motor and 3s controller, you can increase power to 11.1 volts. But this is not so easy, you should know the scale of the engine and the diameter of the motor drive shaft. I learned all this myself at the time at 14 years, so it's not that complicated.
It's the one here: https://hobbyking.com/de_en/turnigy-1500mah-3s-20c-lipo-pack.html?wrh_pdp=3
Give one easy: Jonny Hand WLtoys 144010; believe should be rich
I don't know who he used, you could send me a video link or the video title. But Johnny Hand has already burned an X Maxx with 10S, so he doesn't know that.
So this battery that Jobny hand used in the video isn't making any damage to the engine now?
No, there are no 3S batteries with 7.4 volts. The cells are generally only a rough term of how many volts the battery has 3S=11.1 volts
So you have 3s, but you can only use them up to 7.4V. OK. Could you send me the link?