Hello, with my generic trigger 50 with am6 engine, the gas sometimes gets stuck when I drive at full throttle, but only when I turn the idle speed further in. Has anyone ever had the same problem or does anyone have any idea what it could be?
(1 votes)
Loading...Good morning, I've been having problems with my S51 for some time now. When I start it from cold, everything's fine. It starts right up, holds idle, and responds perfectly. However, if I warm it up for just about 5 minutes, the problems start: 1. At high revs, a strange rattling noise comes from somewhere…
Hello, on my Aprilia SX 50 the rear wheel has a lot of play and when I ride everything wobbles and makes unpleasant noises. One of my warehouses looks like this. Could that be the reason? And where can I quickly get a new one and how do I replace it?
I'm interested in riding an e-scooter and learning how to ride it for short distances. However, I'm having the difficulty that, firstly, I have very little road experience, so I still have to learn how to ride one. Another difficulty is that I live on a mountain and will probably have trouble with the incline,…
Hey. This may sound silly as I write it, but when I brake on my e-scooter, it doesn't go "ffffffffffffff" but rather "fff fff fff fff." It's as if the brake only occasionally touches the tire. Is this normal?
Hello folks, I bought a 'Retro Star ie' scooter from Nova Motors in July. I love it and am very happy with it. Strangely, for some reason, I had memorized that the first service was due at 1,000 km. Then I recently checked again and saw that I should have done it at 500 km….
Hello, my tph 70cc sweet no longer produces any vacuum. At first I thought it was the fuel pump, which I then replaced but it didn't work either. Then I installed a new 17.5 carburettor from Dellorto as well as a new intake manifold and the diaphragm didn't work again. I measured the compression and…
If something’s stuck, you don’t have to turn around the stand gas.
The gas train simply hangs, either on the handle or on the carburetor….
If I’m standing the gas is too little and I always have to give some gas in standing, it runs normal while driving but if I continue to turn it in the stand it’s running liquid when I then turn the gas back on a full-gas ride it’s getting gas, so nix with gas stays hanging
Seriously: the writing is not to read..
I’ll take a look.
Readable, from point to point
I guess the carburetor’s setting isn’t right, more precisely the air supply. Would clean all nozzles and make a basic adjustment.
Oke I re-engineer myself, the moped dies in a standstill if I don’t give a little gas so I turned the stand gas screw further in and then the gas stayed at full gas.
Try to spray with some spray oil, e.g. WD40 the train at the goose and at the carburetor then move the train a little bit;)
I hope it folds;)
LG Louis