ByBrian891
I want to buy a 3D printer soon to print something like anime figures
Or print a live size figure with several parts and put them together
What can you recommend?
I often come across creatily k1 Max on the internet. Is it good or better to stay away?
(2 votes)
Loading...Which printer is better for the office? A laser printer or, for example, an inkjet printer like Epson's, where you refill the ink, like the Eco Tank printers. and in terms of cost factor, is it better suited to saving?
I have a Flashforge Adventurer 5M and want to print a case for the printer out of PETG. I'm using an Orca slicer. I've calibrated the filament and use a flow rate of 0.98 and an advanced pressure of 0.05. I heat the print bed to 70 degrees Celsius and the hotend nozzle to 240…
Hello, can the bambu lab a1 also work without the combo Multi Color printing
Good day dear community, When I test my Epson printer or send files it only prints blank paper, it basically spits it out. I secured the internal printing components of my Epson printer during the move. It took me at least three weeks to get the printer running for the first time, with the internal…
Hi, I want to have stickers printed for my football club. Do you know any websites or shops where I can buy them cheaply (with my own design)?
I use a Sovol SV08 for big figures. I am very happy with that.
Here are 2 figures with over 30cm height:
The K1 and the SOVOL are similar in principle. However, the SV08 has a fixed bed. This is an advantage at high speeds.
The liability of the bed is exelent. It is a ceramic heater with 230 volt installed.
The heating speed is very fast in bed and nozzel.
The spirits fight over the extruder. I had no problems in over 50 prints.
Depends on the size of the figures.
For something like this, the printer might go:
If you want smaller, or with more details, then I’d rather grab a Resin printer.
So wants to print live sized albedo figur but also in 30cm
Well, the figures are usually never completely printed, but always in several parts, which is why I don’t think you need a printer with a print bed of over 30 cm. Besides you might want to print helmets, where it can be more relaxed to print them directly completely.
But otherwise, I’d rather go to BambuLab.
Wow great quality. Did the figures create themselves?
I wouldn’t do a resin printer. You’ll find that really great. It is also possible to heat it with a hot air dryer and additionally smooth it.
PS: would have recommended BambuLab as an alternative. Also bring super quality at reasonable prices.
The cat has been particularly successful. : Which printer do you use? They look very good. But I don’t think it was possible without support. Many overhanging parts and very filigree. Especially the blades.
BambuLab P1S.
And the figures were actually all printed without support.
Are multi-part and then glued together.
Ahh, okay, that makes printing much easier. But printed cleanly. The new printers are really fun. :
It’s nothing about linear rails.
Depends on your budget.
Little Budget –> BambuLab A1
Medium budget –> BambuLab P1S + AMS (I myself)
High budget –> BambuLab X1C + AMS
What about bambuLab?