Hello. I have a Yantek snow blower with a 6.5 hp 196cc Loncin gasoline engine.
Both reverse gears aren't working, so the tiller either moves forward or doesn't move at all. The gearshift is controlled by two Bowden cables connected to a shaft. I'm really at a loss.
I would appreciate any help. I can send pictures if needed.
Greetings
(2 votes)
Loading...Hello, I have a Mercedes W123 250 that occasionally dies, but not due to driver error since it's an automatic. If I don't accelerate, the engine runs rough and the battery charging light comes on, and occasionally the engine dies as a result. This effect is often amplified by sharp steering. What could it be?…
Good day, Today, while reversing, I hit a parked car with my trailer hitch. Naturally, I waited for the vehicle's owner and called the police. They came and recorded the accident. It's 100 percent my fault. It just happened, and luckily, it was only minor damage. Now, to my problem. I hit the license plate…
Hello What exactly does this light mean? Does this indicate a fault in the airbag system or the belt tensioner system? Peugeot 206 year of manufacture: 2000 Greetings
Good evening The rear left light on my Audi A4 isn't working. The indicator, taillight, and brake light aren't working. I'm wondering what the possible cause could be, as I once had water in my footwell, not that there's any connection.
Hello, My question is how much power you gain if you turn off the EGR. Because I have the feeling that it reaches 200 km/h quicker and easier with the EGR off.
Die Bowdenzüge kann man i.d.R. einstellen, entweder muss der Zug länger oder kürzer eingestellt werden, das musst du eben ausprobieren. Dazu gibt es die gerändelte Überwurfhülse und die Einstellung wird mit der 6-kant Kontermutter fixiert.
Man löst zuerst die Kontermutter und verdreht die Rändelschraube in die eine oder die andere Richtung, wenn der Gang wieder geht, musst die Kontermutter festgezogen werden.