Driving test?
Hello,
I have my driving test soon, but I've noticed that when I turn onto a new road there are no signs indicating how fast I'm allowed to go, so I sometimes end up doing 30 when the speed limit is 50, or 50 when the speed limit is 30. I also failed my first test because I was coming out of a motorway and then braking slowly, but the examiner said, "You're doing 75 even though the speed limit is 60," and I was pretty sure I hadn't seen a 60 sign.
Does anyone have any tips on how to prevent this from happening again?
(1 votes)
Loading...
Honestly… and nix personal…
If you don’t know where to drive as fast, you’re not ready for the test! And what did your instructor teach you?
In the 30 zone you can bend as much as you want, and yet the 30th applies everywhere. Until you get to the sign indicating the end of the 30-zone.
If this is a speed limit, it is theoretically over after the next crossing or opening. Unless there’s a new shield after that….
So basically, if you not you’re in a 30 zone and no sign, then you can drive 50. If you pass a 30 zone shield, the 30 will be valid until you see a 30 zone shield.
If there is a normal speed sign with a 30, then these 30 apply until the next intersection.
A tip I got: If you’re not sure after bending, look in the back and look in the mirror at the intersection for the square shield that starts the 30 zone. If you recognize this from the back (you see it through), you know that you’re just in a 30 zone.
As you know, if you’re very insecure, drive 30, that’s better than 50 if you’re allowed to go in the end. Then you fell through.
And if you drive 30 where 50 is allowed, you’ll fall right through.
Many testers give time from cunning to the next sign, if the speed should not be adjusted, this leads to breakdown. The same applies to increased occurrence.
But not immediately, right? I think the examiner will point out once (for example, in the form of a question: “How fast can you drive here?”) and if it happens a second time it will be critical…
A cross does not raise a road ban !
If you come from a 30th zone and don’t immediately drive 50, as you’re insecure, this – at least in Berlin – does not lead to falling through.
If you drive too fast, you can get out
Then this is so with you in the county .. not here .. not even until the next sign.
20 too slow is a traffic disability and is punished.
When Zone 30 is 30 to drive until the zone ends when the normal signs are standing again to 50 high after bending.
Main roads = 30 zone
Main roads mostly = 50 zone.
Look how fast the others drive, drive slowly if you don’t have a warning.