Die Patronen trocknen schnell aus bei diesem Drucker.Was kann man dagegen machen das es nicht schnell trocknet. Ich benutze den schon aber selten ?
(1 votes)
Loading...
(1 votes)Loading...
(1 votes)Loading...Similar Posts
Error message on HP DeskJet f380 printer?
Byseppi914
Hello I changed the cartridges in my printer because I was getting an error message and an E. The cartridges are new, and the error message still appears. I've already reset the cartridges (about 6 times), but the message still appears. Do you have another solution? Thanks in advance.
What kind of paper must be used in a laser printer
Do I need to use normal copy paper or special thermal paper?
Copying with HP printer – select paper type?
Hello, I'm having a problem with the new recycled copy paper I bought: the black is barely visible, or not visible at all. I have to change the paper type to recycled each time I print, and it works. This function isn't available for copying, as I don't start it from the PC in the…
Printer HP Color LaserJet CM1312nfi MFP?
Hello forum, I'm asking for help. I just got this printer. Do I need a cable to connect it to my laptop, or does it work via Wi-Fi? Unfortunately, I don't know anything about this. Thank you very much.
Printer doesn’t print DVDs?
Hello, My Epson XP 6000 printer prints flawless color prints. Recently, however, it has only been printing printable CDs, DVDs, and Blu-rays in black and white, even though the settings have remained the same. What to do? Thanks for info
My Brother MFC-J6720DW has lost its red color?
Hello everyone, I have a Brother printer (see above) as my main printer. The red color has disappeared, meaning it's become increasingly less noticeable in the printouts. Cleaning it myself, etc., hasn't helped. New ink doesn't help either. Does anyone have any idea what I can do besides calling Brother and sending it in? I'm…
Inkjet printers always run in standby is mandatory. The little electricity is not worth the speech. For this, the nozzles do not dry and even if you do not press daily it still works. He also uses much less ink.
In the standby, the printer does not make great cleaning at the beginning. You save a lot of ink.
As much as I know, the print heads at HP printers are installed at the bottom of the cartridge. So you can take the cartridge out and put it on a damp cloth. The nozzles get a little damp and so the dried ink dissolves. Soon the damp cloth or paper will be full of ink. That means the nozzle is free again. Use the cartridge and it’s good.
Woooow. Thanks for the tip. How do you mean run in the standby? How far?
Inkjet printers always have to be powered. They usually go back to the standby automatically after a certain time. From the standby, he does not make a big cleaning if you want to print something again. It saves a lot of ink. In addition, the nozzles are better protected against drying out.
Thank you very much.
My Brother printer has a special standby button that I have to press at the end. Also to start press 1x on and it runs again.
Don’t know how HP printers work exactly. Check the instructions for or on the HP page on the Internet.
So I’ll finish the printer after printing. Should I not allow the printer to switch off with respect to the standby?
As long as you’re not good at breaking up and rebuilding, you can’t do anything.
The rubber cups that seal your cartridges will not be well placed.
Maybe badly deburred.
Or, you’re cutting the printer off the power without turning it off. Then he can’t drive the cartridges into the parking position.
Unfortunately nix even if you do a hood over it, so I would recommend you here more a laser that does not dry out.
Well, I have heard and read the laser printer can only print in black and white, it depends on what he wants to print whether in color or whether the black and white is enough.
In which century do you live? Of course there are color lasers and not only since yesterday
I guess you’ve read it. Qualitative is of course something else.
No, that’s not true. I have a color-laiser printer myself
It makes much more sense to use a Laiser printer
What is a Laiser printer? I don’t know…
well, then let’s stand this way
who is relying on “true and believe” on such dubious statements on the Internet…
Not so long ago, but I don’t know where exactly that was, and of course I know perfectly with it, not for nothing with me everything is full of technology.
all well, colour lasers are longer and are also affordable. However, pay attention to the pressure volume.
these are, of course, somewhat larger and heavier..
if I would always recommend you a MFP (multi-function) printer that can also scan and copy what you need a lot today.
AHA… I doubt now that you know prima with new and old TEchnik, colour lasers existed in the previous century, so it seems to have bad knowledge gaps and interest me once, where and when it was claimed that there are no color lasers? 1910??
I don’t live in the century after all I know myself well with the latest as well as old technology, but I had read on the internet or heard that these only print black and white so I hadn’t looked any further, you can’t always believe what is written or said.
Okay, then I also know how expensive this is, do some business and partly private at my home in the studio, have no printer for years.
Depending on what you want to do 🙂 if you only need Office, a simple S/W printer is completely.
I print color myself in the company, pictures at Rossmann
I haven’t read it, is YouTube and Internet in general that everyone can write and upload everything
There are always models on offer. e.g. under MyDeals
Okay, good to know, okay then I know, I’ve already thought about getting one.
I can only recommend S/W laser printer.
Colorful goes too. It’s just a little more expensive. ^
I don’t need paint.
I have a fax (multicultural printer) ^^