CPU Kann mehr strom Ziehen als Erlaubt?
Hallo bei meinen Mainboard ist standart mäsig wie auf den Bild zu sehen die CPU auf PL1 135W und PL2 253W begrenzt ist das nicht zu viel da laut intel software die CPU nur PL1 65W und PL2 153W nutzen darf die kühler können die 135W Problemlos weg kühlen meist Hällt sich die CPU im Sommer so bei 120 bis 125W auf
ich habe an den einstellungen von der CPU nichts geändert nur Den Ram habe ich etwas reduziert da sonst der PC immer abstürtzt mit einen Bluescreen
(1 votes)
Loading...
PL1 and 2 can be set in bios that attempts to detect your processor in normal cases and load standard values…The normal case is not the rule haha.
So you go to the BIOS and enter the values according to Intel’s data and then check again with Hardware Info.
At Ram nothing is changed, you can load your XMP/Expo profile at most. The rest is dangerous for lay people.
My motherboard wanted 2666 MHZ benefit but what for the ram too much truth I have set only to 2400 MHz but this is harmful if the CPU standart so much consumed the Max are 1.2V here and since also 1.3V almost
If Vcore 1.2V is then it needs a bit more than 1.2V in the TurboBoost. Start a program that generates high load and just observe the values on the other. You already have the best program for this: HWInfo. Just take a game or the built-in stress test in CPU-Z if you have.
I have put the power limmit now on that of Intel has not really changed to the temperature
Shades this on the duration of the CPU if the can consume so much? the cooler is a Be quite Pure Rock 2 or 3 I believe with 250W heat dissipation
I5 13500 without K without I
I wonder if this is harmful to duration
What model do you have?
Ah, in the picture. Wait. No time. Give me half an hour then I will write you a guide or look for your manufacturer + bios + CPU Power
Yes I’m looking for something because I don’t know the mainboard really but think yes
Okay, other thing. Does not change the PL1 performance limit (stable) and PL2 performance limit (stable)
Can you set these in the bios by intel?
I set the value back before I started the test
From left to right: currently minimum maximum average.
When you click on the clock below right, the values reset. Just do it
I have made a picture while the program runs and this is the result
Unfortunately, there is nothing in the picture: (please check again.
I tested the CPU with the MSI Kombustor CPU last test and what you see on the picture is the result or with the MSI Kombustor CPU Burner