Hello, we have a router downstairs and an extender upstairs. Our computer is downstairs, and that's why it always connected to the router normally. Now it only connects to the extender, and the router's Wi-Fi is no longer even displayed. If we turn off the extender, the router's Wi-Fi is still not displayed, and our computer no longer has any Wi-Fi. Does anyone have any ideas what might be causing this?
(1 votes)
Loading...I have a 6660 as my main box and a 6490 via LAN cable. I can see the network devices on the 6490, but I can't configure any corruption. One device is blocked on the 6660, but it's active on the 6490. Is there any way to configure this?
I have 3 VLANs VLAN 10 = Management (10.110.1.254) VLAN 20 = Client (10.110.2.254) VLAN 30 = Printer (10.110.3.254) The DHCP server has the IP (10.110.1.1) on port 48 and is untagged on VLAN 10. The printer is on port 2 and untagged on Vlan 30 Now I have set up ip helper on VLAN…
Hello, I had a really bad flood yesterday because I accidentally left the shower on. This means that water also got on some of my appliances. Would it be safe to plug in my printer after 8 p.m.? Most of the water is already gone, but I'm worried that my printer will burst/explode because of…
Does anyone have experience with this kind of DSL throttling? Will it be lifted again in the new month, essentially by the computer? In any case, we are not prepared to pay for another month of the contractually agreed 500 Mbps, of which 100 are even guaranteed for download, if that should be the new…
Due to issues with a device and my PC on my network, I need to change my PC's MAC address. I'm using Windows 11 Professional and a USB device to connect my PC to the Wi-Fi. If you need further information, please ask.
To enable routing from one VLAN to another, a router can be used. This is based on the included packet tracer circuit. a) Add an expandable router below Switch 3 (Router Selection -> "PT Router") b) Expand the router with 3 Gigabit Ethernet ports: Turn off the router under "Physical" (press the button on the…
First, you should check the Wi-Fi on your router. Turn off all extenders and, with a cell phone nearby, check to see if the router's Wi-Fi is even turned on, and if so, why it's not showing up.
It could also be that someone has messed around with your WiFi.
If the Wi-Fi is turned off, well then you know what to do.
Many and it feels like/read that almost EVERYONE uses and sets up the extender incorrectly.
You ALWAYS put it halfway along the route and not where you need the WiFi.
So if your router is at the top and your PC AND extender are at the bottom, you know the error.
It might help to relink the extender.
However, if you change anything on the Wi-Fi and have a standard extender, in the worst case scenario you will have to set everything up again.
Okay thanks we'll look again