Bequit Pure Base FX Einschalter ohne Funktion?
Hi,
Habe ein Pure Base FX Gehäuse. Bei dem der Einschalter nicht funktioniert. Wenn ich den PC mittels Schraubenzieher kurzschließen funktioniert alles Perfekt. Habe alle Kabel geprüft, und festgestellt das ein dickes USB-C im Gehäuse nicht angeschlossen ist. Das kommt vom Einschalter. Auf dem Mainboard habe ich aber keine Möglichkeit das anzuschließen. Jemand eine Idee?
Danke
Hello,
Are you sure? Normally, normal cables come from the on/off switch, which are connected to a lift on the motherboard. Also shown in the motherboard.
LG
Hi.
As can be seen in this picture, these three cables all come from the front panel:
https://extreme.pcgameshardware.de/threads/bequite-pure-base-500-fx-gehaeuse-connected.636685/post-11346962
I didn’t connect USB-C because no slot on the board.
I connected the other two.
But the front panel is death with me. Don’t glow.
If I press a switch doesn’t happen. PC doesn’t go. If I close the two pins by means of a screwdriver, the PC goes on.
That’s why I suspect that the USB-C cable also has electricity for the front panel.
Unfortunately, the manual of the housing does not explain much.
https://www.bequiet.com/admin/ImageServer.php?ID=d2509a43410@be-quiet.net
Here at 7:05 he shows the cables:
https://www.youtube.com/watch?v=NqNO926r5uY
This must be inserted with “Power SW”