Would it be correct as shown?
This is supposed to be a 1,000-watt spotlight connected to the 8 kVA generator. Is that correct, assuming you've wired it from the consumer to the generator?
(3 votes)
Loading...There are tons of useless cables in my old apartment. Yesterday I disconnected a cable because it simply disappeared into the wall for no good reason and there's no outlet for it. The approximately 30 junction boxes are similarly scattered, and disconnected ground wires throughout the apartment make it impossible to see through them. However,…
Hello, I've connected my balcony power station, but according to the flashing light on the inverter, it's not producing enough power. I've connected it in series as shown in the picture. It doesn't really matter which way the current flows, or should I perhaps connect it the other way around? Can someone help me?
A: Well drilling, B: Tunneling, transportation system construction, road construction, and civil engineering?? I need these machines for my studies… thanks everyone. I'm looking for the machines that drill there to access these materials. What raw materials are needed for civil engineering?
Hello, I got a Jbl Box 6 and there is a symbol. Does anyone know what that means?
Hello everyone, So I had a kitchen planned at Ikea. This includes an oven and an induction hob. Now Ikea is telling me that the oven can only be connected if the sockets are separately protected. I believe that's the case, though; at least that's what it says on electrical box number 18. Now for…
Given are: 𝑈𝑞1 = 2𝑉, 𝑈𝑞2 = 8𝑉, 𝑈𝑞3 = 4𝑉, 𝑅1 = 𝑅2 = 𝑅3 = 5Ω, 𝑅4 = 7Ω, 𝑅5 to 𝑅9 = 6Ω and Rtotal for the passive part is: 10.5 Ohm For the current flowing, you just need to calculate Ul/Rtotal, right? I can't seem to get the given result. Could…
Then your drawing doesn’t fit. Because then the cable drum would have to stand in the power generator.
Here it comes to what is used for cable drums. For example, EISEMANN cable drum KSA 20 is the short cable with the plug.
But you have Cable roller THW 230 V it’s just different. So from the producer to the consumer.
Important to note. The lines are disengaged by rolling off the cable drum. There’s no way the cable is pulled through the site. The cables don’t like that in the long term.
We actually pull the classic way and the cable drum remains with us at the tripod. A crank on the drum during a cable to the unit or to the power source. Others came before. It’s not a rule with us.
You can do that like THW. If with us someone would break the cable through the fire place, he would have problems with the unit leader and the equipment store. Handling of the devices is not to pull the cable over sharp-edged objects.
Should this be a graphic for training? Then maybe somehow still inscribe the maximum line length of 100 m
No. I write everything about what they teach me, I can use it and learn
If the drum is completely unrolled, yes. Just one question: in which OV are you and come to BuJuLa?
OWun. What’s that?
I wouldn’t have anything to do with it, it depends on what I want to illuminate and why.
Place of use. THW
Super.
Yes. LiMa’ (LightMastAnhanger) also have 3000w. I think the 8 kva has a light power of 5000w so there’s something going on.
But 1000 W make a lot of light.
So these are the little ones with 1000W that we have installed normally on our standart. It’s more than a point of use. For larger places, camps and pitches you need larger