Hey
I have a WQHD monitor 120hz
Desktop resolution also says ''2560 x 1444''
But with active signal resolution ''1920 x 1080'' 144hz
I must have adjusted something somehow
How can I set the active signal resolution back to WQHD
Screenshot -> https://prnt.sc/laLV0l3gAZsw
(1 votes)
Loading...I want to connect a 3.5-inch display to my Raspberry Pi, and I've done it, but I can't watch videos, for example, because the frame rate is too low. Can someone tell me what the problem is and how I can fix it, if possible? Here's some more information about the display: Operating voltage: 3.3…
Hello, I just bought a monitor that's supposedly 144 Hz so I can have faster gameplay on the PS5. However, the settings (see image) only show 60 Hz. When I Google the model (Acer XB240H), it clearly says 144 Hz. The PS5 also has enough power to display more than 60 Hz. Do I need…
I'd like to have different images on my two monitors, but I can't seem to get it to work. I googled it, and they said I should go to Settings, then click on the background link, and set it to monitor 1 or 2. But for me, it just says Desktop, not Monitor. I managed…
Hello, I bought an LG 27GL850 B monitor a year ago for €500. It had small pixels in the center and to the left of the monitor that appeared irregularly in different places. If you have a dark background, it's extremely noticeable. I replaced the HDMI cable, and the monitor now indicates that it has…
I connected an older monitor to my laptop as a second monitor via a VGA cable, with the setting set to duplicate. The graphics card recognizes this monitor, but it only displays the duplicated image for a fraction of a second and then goes black again. Pressing the configuration buttons on the secondary monitor produces…
Hey, My PC just came back from repairs. Everything was fine. I've attached the story below, but it doesn't need to be included here. So I unpacked the PC, plugged it in, etc. At first, it only displayed 60 Hz. My monitor is set to 144 Hz at 100%. Before the repair, the PC was…
“View adapter properties for screen 1″ -> ” List all modes”
Here you can set the correct resolution/image repetition rate.