Akkumotor Rasenmäher anschließen?
Wer hat eine gute Idee wie ein Akku Rasenmäher Motor angeschlossen wird ?
Vorhanden sind Rot und Schwarz die führen zum Akku das ist klar.
Gelb, Grün und Blau führen zum Motor das ist auch klar.
Dann sind da drei kleine Kabel, Schwarz, Weiß, Gelb , wohin ?
Und noch ein einzelnes kleines Gelbes Kabel , wohin ?
Würde mich freuen wenn hier jemand sich damit auskennt.
The idea would be to have a schematic as the manufacturer has occupied the veins. Since you have two wires to the battery and three to the engine, it is a brushless DC with a control electronics before it. This must also be somehow controlled. Consequently, safety switches/activation switches must be present and, if necessary, a battery indicator. But the vein colors may be manufacturer-specific. Our battery has a lot more wires both on the engine controller, on the battery controller and on the handle. However, all plugs are selected so that you can not confuse. And he was prewired, so no loose veins. Just had to swap the engine controller, so I know the internal wiring from our…
I assume that the cables start on the one hand and on the other hand for protection or Child protection
Motor can not be started no matter which cables come together
We need to close the right order. First two wires safety switch, then two wires start switch… Wrong order or just a couple and he’s still…
Ggf you can break something when you’re wrong. Is electronics, the short loop ect is not necessarily powered. As I said, it helps the schematic. Ggf is even a bad thing.
When the two yellow come together there is a signal tone similar to a smoke detector