Replace 5w spots with 8w spots?
I want to replace my 5w spots with 8w spots. Both use 200-240v, but the wattage is different. What do I have to pay attention to?
(1 votes)
Loading...
(1 votes)Loading...
(1 votes)Loading...Similar Posts
SpeedyBee F405 V4?
Hello I have built my first drone a 5 inch 6s but I don't know which uart is which I just can't find it in the manual and my video system is the walksnail Avatar HD v3 and the goggles L, is that even possible? when I use the command line in Beta flight enter:…
2 circuits over 1 cable without earth?
ByTonydi
So I hope I can explain this in a somewhat understandable way. I'm currently converting my entire house to LED and now all that's missing is the bedroom. In my bedroom, I currently have six halogen spotlights that can be turned on and off separately via a series switch (three each). This creates two circuits…
The same branch stream twice (branch stream method)?
Byjoahjoee
Hello, we were given an electrical engineering question on the branch current method. However, the branch current I2 is duplicated, while I3 is missing. Is it likely that the teacher made a mistake here? Or can the problem be solved without it?
Lawnmower power plug pulled out, how to fix it?
ByVivi5467
Hello everyone, unfortunately my adapter broke. Can it still be repaired? Perhaps with a replacement plug? Unfortunately, you can't unscrew it. Does anyone have any advice for me? Thank you very much
Radio circuit diagram implementable?
Hey guys, I got permission from my school/state to build an FM radio using the 27MHZ frequency and a maximum of 4 watts. I want to choose simpler circuit diagrams first and then move on to more complex ones. I found the following two circuit diagrams: Since the transmitter was originally designed for 90MHz. My…
Why doesn't the sstc Tesla coil work?
ByJurek43
Hello, I recently built a Tesla using a simple circuit diagram. It was an SSTC. It worked great with direct current until I ran it on alternating current from a variable transformer. Then, after a while, it started popping, and the transistor broke. I replaced it, and since then, the Tesla coil has only worked…
That’s not a problem at all. Even mixed operation went. Only then would possibly not be so tingling with the slightly different light colors from the design.
Hi.
With the power, you are sure to speak of LED.
If due size is the same, it should be easy.
If you use a dimmer to pay attention to dimmability.
yes exactly LED spots were meant the hole size at the old were 70mm at the new ones there are 68mm. this should not be a problem. dimmer is not in use